Masterpact NT06-16 IEC - error

Using the Masterpactdrawout chassisLocking the circuit breaker inpositionPadlocks and keylocks may be usedtogether.If specified when ordering the chassis, thislocking function may be adapted to operatein all positions ("connected", "test" and"disconnected"), instead of in"disconnected" position alone.Combination of locking systemsTo disable connection of the circuit breaker in "disconnected" position in thechassis, use as needed:b one to three padlocksb one or two keylocksb a combination of the two locking systems.Disabling connection when the circuit breaker is in"disconnected" position, using one to three padlocks(maximum shackle diameter 5 to 8 mm)LockingCircuit breaker in "disconnected"position.Pull out the tab.E60022A1 2E51470ATestInsert the shackle(max. diameter 5 to 8 mm)of the padlock(s).The crank cannot be inserted.E51471A3 4E51472AUnlockingRemove the padlock(s).Release the tab.E51473A1 2E51474AThe crank can be inserted.E51475A322Masterpact NT06-16 IECSchneider Electric