Masterpact NT06-16 IEC - error

Checking Masterpactoperating conditionsE60005A E60004AE60003AAmbient temperatureMasterpact NT devices can operate under the following temperature conditions:b the electrical and mechanical characteristics are stipulated for an ambienttemperature of -5 °C to +70 °Cb circuit-breaker closing is guaranteed down to -35 °Cb Masterpact NW (without the control unit) can be stored in an ambienttemperature of -40 °C to +85 °Cb the control unit can be stored in an ambient temperature of -25 °C to +85 °C.Extreme atmospheric conditionsMasterpact NT devices have successfully passed the tests defined by the followingstandards for extreme atmospheric conditions:b IEC 68-2-1: dry cold at -55 °Cb IEC 68-2-2: dry heat at +85 °Cb IEC 68-2-30: damp heat (temperature +55 °C, relative humidity 95%)b IEC 68-2-52 level 2: salt mist.Masterpact NT devices can operate in the industrial environments defined bystandard IEC 947 (pollution degree up to 4).It is nonetheless advised to check that the devices are installed in suitably cooledswitchboards without excessive dust.VibrationsMasterpact NT devices resist electromagnetic or mechanical vibrations.Tests are carried out in compliance with standard IEC 68-2-6 for the levels requiredby merchant-marine inspection organisations (Veritas, Lloyd’s, etc.):b 2 to 13.2 Hz: amplitude ±1 mmb 13.2 to 100 Hz: constant acceleration 0.7 g.Excessive vibration may cause tripping, breaks in connections or damage tomechanical parts.48Masterpact NT06-16 IECSchneider Electric