Masterpact NT06-16 IEC - error

Discovering Masterpact’saccessoriesMicrologic control unitsE46108AFor more in-depth information, see thecontrol-unit user manual.E51329AMicrologic control unitsb standard equipment,one per deviceb long-time rating plugand connectors notincluded, see below:Micrologic 2.0Micrologic 5.0Micrologic 2.0AMicrologic 5.0AMicrologic 6.0AMicrologic 7.0AMicrologic 5.0PMicrologic 6.0PMicrologic 7.0PMicrologic 5.0HMicrologic 6.0HMicrologic 7.0Hb connectors for A, P, H:v for fixed devicev for drawout device.b depending on themodel, control units offerin addition:v fault indicationsv measurement ofelectrical parameters(current, voltage, power,etc.)v harmonic analysisv communication.Long-time rating plugsb standard equipment,one per control unitb setting options:v standard 0.4 to 1 x Irsettingv low 0.4 to 0.8 x Irsettingv high 0.8 to 1 x Irsettingv off (no long-timeprotection).b the plugs determinethe setting range for thelong-time protection.M2C and M6C programmable contactsb optional equipment,used with Micrologic Pand H control unitsb connectors notincluded, see below:v 2 M2C contactsv 6 M6C contactsb connectors:v for fixed devicev for drawout device.b contacts can beprogrammed using thekeypad on the controlunit or via the COMoptionb they indicate:v the type of faultv instantaneous ordelayed thresholdoverruns.b M2C: 2 contacts(5 A - 240 V)b M6C: 6 contacts(5 A - 240 V).b permissible load oneach of the M6C relayoutputs at cos ϕ = 0.7v 240 V AC: 5 Av 380 V AC: 3 Av 24 V DC: 1.8 Av 48 V DC: 1.5 Av 125 V DC: 0.4 Av 250 V DC: 0.15 Ab M2C: 24 V DC ± 5 %power from control unitb M6C: 24 V DC ±5 %external supplyb maximumconsumption: 100 mA.30Masterpact NT06-16 IECSchneider Electric