Masterpact NT06-16 IEC - error

Discovering Masterpact’saccessoriesAuxiliaries for remote operationE51294AInstantaneous undervoltage releases (MN)b optional equipment,1 MN per deviceb not compatible with theMX/2 opening releaseb connectors notincluded, see belowV AC 50/60 Hz, V DC:24/30 AC/DC48/60 AC/DC100/130 AC/D200/250 AC/DC380/480 ACb connectors:v for fixed devicev for drawout device.b the MN releaseinstantaneously opensthe circuit breaker whenits supply voltage drops.b power supply:v V AC 50/60 Hz: 24/48100/130 - 200/250240/277 - 380/480v V DC: 24/30 - 48/60100/130 - 200/250b operating threshold:v opening: 0.35 to 0.7 Unv closing: 0.85 Unb consumption:v pick-up: 200 VA or W(80 ms)v hold: 4.5 VA or Wb circuit-breakerresponse time at Un:40 ms ± 10.E51296ADelay unit for MN releases1 2 3 4 5 63 6MNUVR100/130 VAC/DC10121 2 3S0.5 13 1.5Retardateur de MNTime delay for UVRb optional equipment,1 MN with delay unit perdeviceb delay-unitV AC 50/60 Hz, V DC:v non adjustable:100/130 AC/DC200/250 AC/DCv adjustable:48/60 AC/DC100/130 AC/DC200/250 AC/DC380/480 AC/DC.b the unit delaysoperation of the MNrelease to eliminatecircuit-breaker nuisancetripping during shortvoltage dipsb the unit is wired inseries with the MN andmust be installed outsidethe circuit breaker.b power supply V AC 50/60 Hz, V DC:v non adjustable:100/130 - 200/250v adjustable:48/60 - 100/130200/250 - 380/480b operating threshold:v opening: 0.35 to 0.7 Unv closing: 0.85 Unb consumption:v pick-up: 200 VA or W(80 ms)v hold: 4.5 VA or Wb circuit-breakerresponse time at Un:v non adjustable:0.25 secondv adjustable: 0.5 - 0.9 -1.5 - 3 seconds.E60344AElectrical closing pushbutton (BPFE)b optional equipment,1 BPFE per device.b located on the padlockor keylock lockingsystem, this pushbuttoncarries out electricalclosing of the circuitbreaker via the XFrelease, taking intoaccount all the safetyfunctions that are part ofthe control/monitoringsystem of the installationb it connects to the inputof the COM option.34Masterpact NT06-16 IECSchneider Electric