12.07.2015 Views

Model 4897 Upgrade Kit for Media Air Cleaners Installation - Aprilaire

Model 4897 Upgrade Kit for Media Air Cleaners Installation - Aprilaire

Model 4897 Upgrade Kit for Media Air Cleaners Installation - Aprilaire

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>Model</strong> <strong>4897</strong><strong>Upgrade</strong> <strong>Kit</strong> <strong>for</strong> <strong>Media</strong> <strong>Air</strong> <strong>Cleaners</strong><strong>Installation</strong> InstructionsWARNINGSharp edges may cause injury fromcuts. Use caution when handlingsheet metal.CAUTION1. Read instructions thoroughly be<strong>for</strong>e beginning installation.2. Do not install the upgrade kit in a location where the media will bein direct exposure to UV light. UV lights will cause degradation of thefiltering media.APPLICATIONFits common 20” x 25” and 16” x 25” air cleaners that utilize a 4” thick cartridge filter including models by:• Carrier• General• Honeywell• Lennox• Trion• UltravationRefer to the specification sheet <strong>for</strong> specific model numbers located at www.aprilairepartners.com in the Literature and Manuals section.CONTENTS OF PACKAGEFRAME BASE (QTY 2)FRAME SUPPORT (QTY 4)ADJUSTABLE FOR 20” x 25”AND 16” x 25” AIR CLEANERSDOOR LABEL (QTY 1)INSTALLATION INSTRUCTIONS (QTY 1)90-1557


INSTALLATION1. IMPORTANT: Turn the thermostat mode to OFF and fan to AUTO.90-13852A. FOR 20” x 25” AIR CLEANERS• Snap frame supports into frame base as shown –eight (8) places. Make sure the support slides inand hits the center rail of the frame base.• Adjust supports height to height of air cleaner.2B. FOR 16” x 25” AIR CLEANERS• Frame supports must be shortened. Remove wing nutsand re-assemble supports in upper slots.• Snap frame supports into frame base as shown – eight(8) places. Make sure the support slides in and hitsthe center rail of the frame base.• Adjust supports height to height of air cleaner.90-1549 90-15492


3. Remove the door from the air cleaner.4. Slide the upgrade kit completelyinto the air cleaner housing.90-13815. Secure the frame to the outer housingusing four 1/2” long sheet metal screws.Note: Screws must not interfere withfilter installation.90-15483


6. Apply the door label to the front of the door as shown.Label PlacementLabel Placement16 x 25 AIR CLEANER 20 x 25 AIR CLEANER90-15467. Install the media into the <strong>Upgrade</strong> <strong>Kit</strong> frame using the directions on the filtering media sleeve to ensure the media is in thecorrect orientation; the outlet side of the media is the expanded metal side.90-15558. Install the air cleaner door.9. Return the thermostat mode and fan to the desired setting.90-138610009111 9.10B2701162ARESEARCH PRODUCTS CORPORATIONP.O. Box 1467 • Madison, WI 53701-1467 • Phone: 800/334-6011 • Fax: 608/257-4357 • www.aprilairepartners.com©2010 Research Products CorporationPrinted in U.S.A.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!