OPTIBOX HD 2CICX PVR READY-cover - TVdigitalne.cz

2. Hardware ControlA. Front / Rear panelWatching TV status (Live mode) OSD operating status (OSD mode)1. VFD Display Shows information of selected channel, local time, system status, etc.2. Channel +/- Change current channel. Move cursor up/down.3. Volume +/- Increase/decrease volume levels. Change parameter value.4. OK Shows channel list. Activates the highlighted menu item.5. Menu Shows system setup software. Quits system setup software.6. Exit Moves back from current menu or cancels the progressing operation.7. Tab - Moves among menu items.8. Power Turns the receiver on/off.9. CI Slot Receives data from CI module for conditional access.10. CAS Slot Receives data from Smart Card for conditional access.11. Exit + Left Tab Change screen output mode. Current mode displays in VFD display screen.Functions1. LNB in Receives digital signals from satellite antenna.2. Loop out Connects to extra receivers. (analogue or digital)3. USB USB 2.0 HOST / Connector: USB A TYPE / Current Consumption: Max. 500mA4. RS232 Serial Port Current Receives new Consumption: software from PC. Max. 500mA5. HDMI Sends HDMI signal to TV.6. SPDIF Sends digital audio signal to audio amplifier.7. Component Out Sends separated analogue signal to TV (Y, Pb, Pr connectors)8. Composite Out Sends analogue signal to TV (Yellow connector)9. Audio L/R Out Sends signal to audio amplifier (Red/White connectors)10. Scart Connector Upper connector sends analogue signal to TV. Under connector receives analogue11. Power Cord signal Receives from electric to your power. VCR. Check VCR signal power passes specification. through (See to TV. appendix B-6)7