SB5100 Series Cable Modem User Guide Introduction ... - Optimum
SB5100 Series Cable Modem User Guide Introduction ... - Optimum
SB5100 Series Cable Modem User Guide Introduction ... - Optimum
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Introduction</strong> Before You Begin Installation & Configuration Troubleshooting FAQGlossaryLicenseSetting Up a USB Driver in Windows XP Be sure the SURFboard <strong>Cable</strong> <strong>Modem</strong> CD-ROM is inserted into the CD-ROM drivebefore you plug in the USB cable. A few seconds after you complete the USBconnection, the Found New Hardware Wizard window is displayed.1 Be sure “Install the software automatically” is selected.2 Click Next. Windows automatically searches for the correct USB drivers and installsthem. If the installation is successful, the window at bottom left is displayed.3 Click Finish to complete the installation. Otherwise, be sure the SURFboard <strong>Cable</strong><strong>Modem</strong> CD-ROM is correctly inserted in your CD-ROM drive.When you finish setting up the USB driver, you can continue with “Configuring TCP/IP inWindows XP” on page 30..Although your SURFboard cable modem model number maybe different than in the images in this guide, the procedure isthe same.XHome Print Exit21 <strong>SB5100</strong> <strong>Series</strong> <strong>Cable</strong> <strong>Modem</strong> <strong>User</strong> <strong>Guide</strong>
Change language