LM Guide Model HR

More documents

Recommendations

Info

www.thk.ru thk-mail@ya.ru Тел. (495) 727-22-72HRStandard Length and Maximum Length of the LM RailThe table below shows the standard LM rail lengths and the maximum lengths of model HRvariations. If the maximum length of the desired LM rail exceeds them, connected rails will beused. Contact THK for details.For the G dimension when a special length is required, we recommend selecting the corresponding Gvalue from the table. The longer the G dimension is, the less stable the G area may become afterinstallation, thus adversely affecting accuracy.Standard Length and Maximum Length of the LM Rail for Model HRUnit: mmModel No.HR 918HR 1123HR 1530HR 2042HR 2555HR 3065HR 3575HR 4085HR 50105HR 60125Standard LM raillength (L0)70120220295110230310390160280340460580220280340460640280440600760100012402804406007601000124057088512001620204024607801020126015001980258012701570202026201530189022502610Standard pitch F 25 40 60 60 80 80 105 120 150 180G10 15 20 20 20 20 22.5 30 35 45Max length 300 500 1600 2200 2600 3000 3000 3000 3000 3000Note 1: The maximum length varies with accuracy grades. Contact THK for details.Note 2: If connected rails are not allowed and a greater length than the maximum values above is required, contact THK.
www.thk.ru thk-mail@ya.ru Тел. (495) 727-22-72ImageHR OPTIONSOptionsFor model HR, dust-prevention accessories are available. Make aselection according to the application and the installation site.2Dedicated C-cap for LM railmounting holes1End seal
Page 1: www.thk.ru thk-mail@ya.ru Тел. (
Page 4 and 5: www.thk.ru thk-mail@ya.ru Тел. (
Page 15: www.thk.ru thk-mail@ya.ru Тел. (

LM Guide Model HR

Create successful ePaper yourself

Delete template?

Save as template?