NOBELREPLACE - Nobel Biocare

More documents

Recommendations

Info

procedure: several teeth missingAnchoring the Surgical Template• The Surgical Template can now be anchored to theimplant using a Guided Template AbutmentNobelReplace RP.• Use a Screwdriver Unigrip to tighten manually.SEVERALInstallation of the Remaining Implants• After the Surgical Template has been tightly attached withthe Anchor Pin and to the first implant, proceed with thepreparation of the remaining implant sites.• Install the remaining implants according to the proceduredescribed previously.• Leave Implant Mount on to keep soft tissue out of the way.Note! No template abutments need to be placed on theseimplants.Removal of the Surgical Template• When all the implants have been properly placed, removethe Implant Mounts and Template Abutments.• Use the Guided Soft Tissue Punch RP directly in thetemplate sleeve to completely remove all soft tissue.• Remove Anchor Pin and Surgical Template.22
Prosthetic Procedure Teeth-in-an-Hour Mounting Guided Abutment NobelReplace RP in Procera ®Implant Bridge.• Before the sterile abutments are placed, make sure thebridge is thoroughly disinfected.• Moisten the abutments by quickly dipping them in sterile,saline water.• The Guided Abutments NobelReplace RP are placed inthe Procera ® Implant Bridge.Note! Following placement of the abutments, do not turn thebridge upside down. This to avoid the abutments falling out!Delivery of Procera ® Implant Bridge• When the abutments have been placed in the bridge, thebridge is positioned onto the implants and screw-retainedusing the Screwdriver Unigrip .• After the bridge has been inserted, use the ScrewdriverUnigrip to tighten to first resistance and ask the patientto bite gently to balance the bite relationship.SEVERALTightening• For the final tightening, use the manual torque wrenchprosthetic and Screwdriver Unigrip machine. The abutmentscrews should be tightened to 35 Ncm.• Verify the correct abutment connection with radiographicimaging.• If required, occlusal adjustments have to be performed.Temporarily seal the screw access holes.• Control occlusion and function after 1 month.Check screw tightening to 35 Ncm.Final sealing of screw access holes.23
Page 1 and 2: procedures & products - Powered by
Page 3 and 4: table of contentsBeautiful Teeth No
Page 5 and 6: quick startConcept OverviewExaminat
Page 7 and 8: quick startSeveral Teeth MissingFor
Page 9 and 10: NOBELREPLACE Straight GroovyPlatfor
Page 11 and 12: important considerations for all in
Page 13 and 14: important considerations for all in
Page 15 and 16: Site Preparation (cont.)• Use the
Page 17 and 18: Prosthetic Procedure - Temporizatio
Page 19 and 20: Site Preparation of First ImplantTh
Page 21: Implant Placement• Insert the mou
Page 25 and 26: procedure: all teeth missingSurgica
Page 27 and 28: Site Preparation of First Implant (
Page 29 and 30: Installation of Remaining Implants
Page 31 and 32: Prosthetic Procedure - Temporizatio
Page 33 and 34: appendix I - kitsGuided Drill Stop
Page 35 and 36: appendix III - other related produc
Page 37 and 38: product catalog32794 NOBELREPLACE
Page 39 and 40: product catalogImplant Mount32864 G
Page 41: eference guideIndex in articlenumbe

NOBELREPLACE - Nobel Biocare

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?