CNIC/IC/CCP Hourly Wage Agreement (including ... - Blet602.org

with jurisdiction on the respective territory prior to bulletining positions whereit is proposed to change any on or off duty points.B. The starting time of an Engineer shall commence at the time he is required toreport for duty, and his pay shall continue until the time he is tied up.C. When Engineers are relieved at points other than the point of going on duty, theCompany shall provide transportation to the appropriate off duty point whichshall be at a recognized location as designated by the Company.D. An Engineer operated to an away from home terminal that is not his normalaway from home terminal location will be considered first-out upon completionof his legal rest. Upon the expiration of twelve hours, or sooner if available, anengineer used in this manner will only be called to deadhead or to work back tohis home terminal. Upon the expiration of twelve hours, an engineer referred toherein that is not called as described shall be considered on pay until called forduty; and such time shall not be counted towards his hours of service.E. Except as otherwise agreed, changes will not be made in reporting and reliefpoints until suitable wash and locker room facilities have been provided. Wash,locker, toilet facilities and hot and cold running water will be provided forEngineers on all assignments.F. Engineers performing service in connection with the Engineering Department(work train) may be tied up at any point away from their home terminal on any ofthe six (6) working days of the week and will be allowed one (1) day's pay for eachcalendar day so held, Engineers used in this manner will be released over Sunday, butif held subject to a call, a day's pay will be allowed.1. Engineers called to perform service as outlined herein shall remain onsuch assignment for its duration for up to one (1) calendar week. Ifsuch individuals are not returned to their home terminal, they shall alsobe provided a meal allowance and lodging.2. Service as outlined herein shall be filled from the GEB.Question: An Extra Board Engineer is called for a work train that ties up onthe road on the engineer's regular scheduled day off. Is the engineer entitled to time andone-half if he works his off day?Answer:Question:work train?Answer:YesCan a engineer refuse to work his day off while tied up on the road on aNoQuestion: Will the engineer that has been tied up on the road on a worktrain and works his regular assigned day off be entitled to 24 hours off when he tiesback up at the extra board point?Answer:No, the engineer was allowed time and one-half for working his off day.28