Tool Holders - Hardinge

More documents

Recommendations

Info

CHNC ® IIICHNC ® IIISPPage 32Tool Setting Bar, Gage & Vertical SlideTool Setting Gage BarThe tool setting gage bar is used to align round shank tool holders with the spindle centerline.The hardened and ground bar allows both 5/8" and 3/4" diameter round shank holders to becentered. The metric tool setting gage bar has 16mm, 19mm, 20mm diameters. The flatsection on the end of the bar is used to set the adjustable tool setting gages.Tool Setting Gage, English – Part Number: HPA-0010027Tool Setting Gage, Metric – Part Number: HPA-0010027-MAdjustable Tool Setting GageABThe tool setting gage is used to set cutting tools to the height of the spindle centerline quicklyand accurately for longer tool life, easier cutting, better surface finishes and closer tolerances.The gage is hardened and ground to maintain accuracy and can be used for setting toolscutting on the front or rear of the workpiece.The gage has two ground surfaces "A" and "B". Surface "A" is for setting tools to cut on the frontof the workpiece, surface "B" is for setting tools to cut on the rear of the workpiece. The topsection swivels to cover and protect the ground gage surfaces.The gage can be set to the centerline of the spindle using the tool setting gage bar shown abovewhich is held in a 1.000" or a 20mm round collet in the machine spindle.The gage can also be set using an indicator stand positioned on the top of the bed plate. Aground plug is held in a collet with the 1" travel indicator set to the top of the plug. The gageis then set to one-half the diameter of the ground plug.Adjustable Tool Setting Gage (Model N2) – Part Number: NC-0011159Vertical Cut-Off SlideThe Vertical Cut-Off Slide provides an additional tool position for cut-off or groovingoperations when performing bar work. It is air-hydraulically operated and activated by theparts program of the machine. The vertical slide comes furnished with a blade and anadjustable holder that allows the blade to be placed on-center.Vertical Cut-Off Slide – Part Number: CNA-0009650-ACall 800-843-8801Monday—Friday, 8:00 am to 8:00 pmEastern Standard Time for FAST delivery!Hardinge Inc.Elmira, New York 14902-1507 USA© Hardinge Inc., 2001All specifications subject to change without notice.Unless indicated otherwise, all marks indicated by ® and are trademarks of Hardinge Inc.
Tool Touch Probe & Parts Removal SystemCHNC ® IIICHNC ® IIISPPage 33Tool Touch ProbeThe tool touch probe is mounted on the headstock and is manually positioned in front ofthe main spindle to provide a known reference point for establishing the position of turrettooling.Features:• Probe arm provides quick set up and easy use, enabling the operator to set tooling andbe producing parts in a very short time.• Four-direction probe surfaces make it possible to touch off both internal and externalworking tools.• Convenient storage—detachable probe• Audible and visual signals when probe contact is made.• No N/C programming involved in set up.• Accuracy – CHNC III: ±.0008" (±.02mm)– CHNC IIISP: ±.0004" (±.01mm)The tool touch probe is available as original equipment only.Tool Touch Probe – Part Number: 18-0002536-CNParts Removal SystemThe parts removal system can provide a convenient method of automatically removingfinished workpieces from the spindle machining area without interrupting the machiningcycle.The air-operated parts chute is extended during a cut-off operation to catch the part andto automatically retract after the part has been cut off. Finished workpieces can beretrieved through the access door on the main guard without cycle interuption.Parts Removal System – Part Number: CC-0002916-A2© Hardinge Inc., 2001All specifications subject to change without notice.Unless indicated otherwise, all marks indicated by ® and are trademarks of Hardinge Inc.Hardinge Inc.Elmira, New York 14902-1507 USACall 800-843-8801Monday—Friday, 8:00 am to 8:00 pmEastern Standard Time for FAST delivery!
Page 4 and 5: CHNC ® IIICHNC ® IIISPPage 4Misce
Page 6 and 7: CHNC ® IIICHNC ® IIISPPage 6Exten
Page 8 and 9: CHNC ® IIICHNC ® IIISPPage 8Hardi
Page 10 and 11: CHNC ® IIICHNC ® IIISPPage 10Inve
Page 13 and 14: Triple Tool HolderCHNC ® IIICHNC
Page 15 and 16: Adjustable Tool Holder & 1C Collet
Page 17 and 18: Double-Angle Collet Tool HolderCHNC
Page 19 and 20: Adjustable & Revolving StopsCHNC ®
Page 21 and 22: Bar Stock PullerCHNC ® IIICHNC ®
Page 23 and 24: Single, Double & Triple Tool Holder
Page 25 and 26: Quadruple Tool Holder & Universal T
Page 27 and 28: This knurling tool mounts directly
Page 29 and 30: Cut-Off Blade & InsertCHNC ® IIICH
Page 31: Releasing & Self-Feeding Die Holder
Page 35 and 36: Voltage Transformer & Foot SwitchCH
Page 37 and 38: MiscellaneousCHNC ® IIICHNC ® III

Tool Holders - Hardinge

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?