Datasheet GRR - PMCCatalogue

ACCESSORIES: SERIES GRR GRIPPERSGUARDIAN GRIPPERPROXIMITY SWITCHES - EXTERNALThis accessory provides for the external mounting of 8 or12 mm threaded round metal sensing inductive proximity switches.Multiple switches may be mounted using multiple brackets.Proximity switches, targets, and mounting brackets are orderedseparately. See the Switches and Sensors section in the maincatalog for complete switch specifications.NOTE: Target and bracket kits do not interchange with Series1 [5] GRR Grippers.TARGETS & BRACKETS MAY BELOCATED ON BOTH SIDES OF JAWS34 2SHOWN AS 8mmPROX1564mm HEX SIZETARGET & BRACKETSW4SW3SW8SW2SHOWN AS12mm PROXSW6SW5SW1B3SW7DIMLETTERB3SW1SW2SW3SW4SW5SW6SW7SW8GRRx2-x-63in3.544.920.4101.125.8521.9203.080.9001.211mm90.023.410.428.621.648.878.222.930.88mm THREADED INDUCTIVE PROXIMITY SWITCHESPART NUMBERDESCRIPTION51422-005-02 NPN (Sink) 5-30 VDC, 2 meter cable51422-006-02 PNP (Source) 5-30 VDC, 2 meter cable12mm THREADED INDUCTIVE PROXIMITY SWITCHESPART NUMBERDESCRIPTION15561-001 NPN (Sink) 10-30 VDC, 3 meter cable15561-002 PNP (Source) 10-30 VDC, 3 meter cable15561-003 20-250 VAC, 3 meter cableTHREADED INDUCTIVE PROXIMITY SWITCH TARGET KITSSTANDARD CORROSION RESISTANT74994-3174994-32Kit includes 1 proximity switch target and 2 target mounting screws.THREADED INDUCTIVE PROXIMITY SWITCH MOUNTING BRACKET KITSCORROSION RESISTANTCORROSION RESISTANT8mm SWITCH 8mm SWITCH 12mm SWITCH 12mm SWITCH74992-3174992-32 74993-3174993-32Kit includes 1 proximity switch mounting bracket, 1 mounting nut, and 1 mounting screw.16(800) 624-8511www.phdinc.com/grrAll dimensions are reference only unless specifically toleranced.GRR03SOLUTIONS FORINDUSTRIAL AUTOMATION