Rear Suspension - - Freel2.com

More documents

Recommendations

Info

http://topix.landrover.jlrext.com/topix/service/procedure/146634/OD...2 of 4 23/02/2012 7:37 AM6.Remove and discard the bolt from the rear wheelknuckle.7.8.9.CAUTION: Make sure that no components catch.
http://topix.landrover.jlrext.com/topix/service/procedure/146634/OD...3 of 4 23/02/2012 7:37 AM10.Installation1.CAUTION: Make sure that new bolts are installed.Install the shock absorber to the hub assembly.Torque: 110 Nm2.Install the shock absorber and spring assembly.Torque: 32 Nm3.CAUTION: Nuts and bolts must be tightened with the weight ofthe vehicle on the suspension.Install the lower suspension arms.4.Install the brake line and wheel speed sensor brackets.Torque: 10 Nm5.WARNING: Make sure that a new nut is installed.Secure the stabilizer bar link.Torque: 60 Nm6.CAUTIONS:Make sure that the mating faces are clean and free of foreignmaterial.Make sure that the brake hose is not twisted and is correctlylocated.Secure the brake caliper and anchor plate to the wheel knuckle.Torque: 110 Nm7.CAUTION: Nuts and bolts must be tightened with the weight ofthe vehicle on the suspension.
Page 5 and 6: http://topix.landrover.jlrext.com/t
Page 32: http://topix.landrover.jlrext.com/t
Page 39: http://topix.landrover.jlrext.com/t

Rear Suspension - - Freel2.com

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?