Sealed item rate quotations are invited for the following work on ...

IIIT DELHI,3 RD FLOOR, LIBRARY BUILDING,NSIT CAMPUS, SECTOR-3,DWARKA, NEW DELHI-110078NOTICE INVITING QUOTATION (SHORT TERM)<strong>Sealed</strong> <strong>item</strong> <strong>rate</strong> <strong>quotations</strong> <strong>are</strong> <strong>invited</strong> <strong>for</strong> <strong>the</strong> <strong>following</strong> <strong>work</strong> on behalf of Board of Governors,IIIT-D from <strong>the</strong> approved and eligible contractors of specialized job having <strong>the</strong> experience of SITC ofHybrid Type Evaporative cooling system <strong>for</strong> <strong>the</strong> <strong>following</strong> <strong>work</strong> so as to reach <strong>the</strong> office of undersignedup to 3.00 P.M. on 02-06-2009. Quotations shall be opened on <strong>the</strong> same day at 3.30 P.M. in Room No.301, Admn. Block, NSIT, Sector-3, Dwarka, New Delhi-110078 by <strong>the</strong> Executive Engineer (C)/IIIT-D.Name of <strong>work</strong>: Provision of Evaporative Cooling System in one class and lab at IIITD transit campus<strong>for</strong> trial of <strong>the</strong> higher efficiency cooling system at <strong>the</strong> present campus.Estimated Cost: Rs. 2,34,416.00TERMS & CONDITIONS:-1 The <strong>work</strong> shall be carried out as CPWD Specifications <strong>for</strong> Electrical Work (Internal/External - `1994& 1995’).2 Any damage done to <strong>the</strong> equipment / building during execution of <strong>work</strong> shall be on <strong>the</strong> part ofcontractor.3 No T & P shall be issued to <strong>the</strong> Contractor.4 The Contractor must possess valid DVAT Certificate.5 The Contractor must possess valid TIN No.6 Time allowed: 15 Days.7 Schedule of Quantity: As per Annexure-‘A’.8 Clause-12 of G.C.C. is applicable <strong>for</strong> E.I./S.I./Deviation etc.9 EMD – Rs. 4,688.0010 Security Deposit @ 10% will be deducted from <strong>the</strong> bills of Contractor.EXECUTIVE ENGINEER (C/M)/IIIT-D

PROJECT: IIIT Transit Campus (Third Floor, Library Building, NSIT, DWARKA)Annexure–ASUMMERY OF COST FOR HYBRID EVAPORATIVE COOLING WORKSS. No. Description Unit Qty. Rate Amount1.0 Supply, Fabricated, installation and commissioning of Hybrid Type Evaporative Each 1cooling system. Hybrid Cool Air System, built on <strong>the</strong> twin concept of air compressionand water vaporization, as per detailed Technical Specifications below:1. Double Effect Cooling System2. Air Discharge: 10600 CFM at 130 Pa3. Dust Protection inside cooled <strong>are</strong>a – through Positive Pressure of apx 12to 18 mm water.4. Power Consumption: 1 KWH.5. Self Cleaning System <strong>for</strong> Membrances by PLC Control6. Size: 1 m X 1 m X 1 m.7. Apx Wt: 105 Kgs (max with water)8. Air Changes: 30 to 35 per hr.9. Area Cooled: apx 12000 to 15000 CFT10. Body: Stainless Steel in Steel grey colour11. Air inlet Mebrance: Maintenance free Polymer type membrance.12. Motor: Twin speed with rating of 1.0 Kw.13. Double alloy Axil flow.2.0 AIR DISTRIBUTION :2.1 Supply, Fabrication, installation, testing and commissioning of GSS sheet metalducting complete with hangers, supports and rubber gasket sealing as per <strong>the</strong>specification and approved drawing.24 gauge GSS ducting. Sq.M. 38.522.2 Supply and application of 20 mm polystyrene <strong>the</strong>rmal insulation of ducting as per Sq.M. 38.52<strong>the</strong> specifications and drawings.2.3 Supply, installation, testing & commissioning of extruded aluminium constructedsupply air grille without volume control Damper.Sq.M. 0.72EXECUTIVE ENGINEER (C/M)/IIIT-D