316 Stainless Steel, Bronze and Cast Iron Models - SHURflo Industrial

More documents

Recommendations

Info

CENTRIFUGAL PUMPSSHURflo High Head Pedestal-Mount Centrifugal Pumps316 Stainless Steel, Bronze and Cast Iron ModelsModel Ordering Codes and OptionsP: PedestalM: Motor (with base)Example Model: CHPSV4 (will require 1 1 ⁄2 HP ODP motor with >1.15 Service Factor*)(motor not supplied with pedestal pump)(1) (2) (3) (4) (5) (6) (7)CH P S V 41st 2nd 3rd 4th 5th 6th 7thSeal** Impeller Sz. Motor-Mounted OnlySeries Mounting Material(Mech) (NPT Ports) HP AC TypeCH: CentrifugalHigh HeadClosedImpellerM: Motor(with Base)P: PedestalS: 316 SS Bodyand ImpellerB: Bronze Bodyand 316 SSImpellerC: Cast Iron Bodyand ImpellerB: Buna-N(Stainless Steel Case)V: Viton(Stainless Steel Case)C: Viton(Stainless Steel Case)(Silicon Carbide Sealand Seat Faces)1 (1" - 1 1 ⁄4")2 (1" - 1 1 ⁄4")3 (1" - 1 1 ⁄4")4 (1 1 ⁄2" - 1 1 ⁄4")5 (1 1 ⁄2" - 1 1 ⁄4")6 (1 1 ⁄2" - 1 1 ⁄4")To identifyyour impellersize, see chartin owner’smanual.1: 1⁄32: 1⁄23: 3⁄44: 15: 1 1 ⁄26: 27: 3X: 56JFrameMotor”wetendkit”Example:CHMSV1XBlank: no codesingle phaseODP motor3: 3 phase ODPmotorT: 1 phase TEFC3T: 3 phase TEFCNOTE: Not all order code combinations (configurations) are standardmodels available from the manufacturer. Custom model configurationsmay require ordering standard components and/or optional parts thatwill need to be assembled by the customer.Manufacturer reserves the right to change model order codes, standardmodels, specifications, and performance without notification.(*) ODP motors have > 1.15 service factors. Due to service factor, it isrecommended TEFC motors are oversized by one HP increment.Pedestal Pumps are not supplied with a motor.(**) Unless otherwise noted, seal faces are carbon on ceramic.Source: Owner’s Manual L-4076 (12/09)18www.shurfloindustrial.comEffective 1/1/2011Form 45-SHU
316 Stainless Steel, Bronze and Cast Iron ModelsPerformance at 3450 RPM – Standard Models (Water at 70°)Impeller 316 Stainless Bronze Cast Iron HP** GPM of Water at Total Head in Feet* Max.Size Steel Models Models Models Required 10 20 30 40 50 70 90 110 130 Head3 CHPSV3 CHPBV3 CHPCV3 1.5 58 56 52 48 44 34 23 3 – 1126 CHPSV6 CHPBV6 CHPCV6 3 118 114 109 104 98 84 69 50 26 148Performance at 2850 RPM – Standard Models (Water at 70°)Impeller 316 Stainless Bronze Cast Iron HP** GPM of Water at Total Head in Feet* Max.Size Steel Models Models Models Required 6.9 13.9 20.8 27.8 34.7 48.6 62.5 76.3 90.2 Head3 CHPSV3 CHPBV3 CHPCV3 1 48.3 46.6 43.3 40.0 36.7 28.3 19.2 2.5 – 77.76 CHPSV6 CHPBV6 CHPCV6 2 98.3 95.0 90.8 86.6 81.6 70.0 57.5 41.7 21.7 85.0CENTRIFUGAL PUMPSPerformance at 1725 RPM – Standard Models (Water at 70°)Impeller 316 Stainless Bronze Cast Iron HP** GPM of Water at Total Head in Feet* Max.Size Steel Models Models Models Required 2.5 5.0 7.5 10.0 12.5 17.5 22.5 27.5 32.5 Head3 CHPSV3 CHPBV3 CHPCV3 1/2 29.0 28.0 26.0 24.0 22.0 17.0 11.5 1.5 – 28.06 CHPSV6 CHPBV6 CHPCV6 1/3 59.0 57.0 54.5 52.0 49.0 42.0 34.5 25.0 13.0 37.0(*) Test data taken with water at 70°F (to convert data to PSI, divide feet of head by 2.31).Pump performance when pump is new. As pump wears, the performance will decrease.(**) AC HP required at specified RPM is HP rated to handle up to 100 SSU at full flow, with a maximum specific gravity of 1.1, or up to200 SSU at 1.0 specific gravity or less.NOTES: Max. Viscosity = For viscosity up to 400 SSU (at 1.0 specific gravity or less), increase motor HP by one size but not to exceed standard3 HP motor at 3450 RPM or 65 in.-lbs. of torque. For fluids with a viscosity greater than 400 SSU, pump speed must be reducedbelow 3450 RPM.Max. Casing PSI = 200 Max. RPM = 3450Max. Specific Gravity = up to 1.1 for standard models (at 100 SSU or less); HP must be increased by one size for specific gravitiesup to 1.4.Driver data is subject to change without notice; see label on driver for actual specifications.Manufacturer reserves the right to change performance without notification.Price List and Specifications – Standard ModelsListPrice$$$$$$DRIVEPUMP CONSTRUCTION (Wet End)Shaft Pedestal Shaft Port Size Motor Ship Wt.Model Dia. Base Material FNPT Housing Impeller Adapter Seals* (lbs.)316 Stainless Steel ModelsCHPSV3 5/8" CI 316 SS 1 1 ⁄4" x 1" 316 SS 316 SS 316 SS Viton 16CHPSV6 5/8" CI 316 SS 1 1 ⁄2" x 1 1 ⁄4" 316 SS 316 SS 316 SS Viton 19Bronze ModelsCHPBV3 5/8" CI 316 SS 1 1 ⁄4" x 1" BR 316 SS BR Viton 17CHPBV6 5/8" CI 316 SS 1 1 ⁄2" x 1 1 ⁄4" BR 316 SS BR Viton 20Cast Iron ModelsCHPCV3 5/8" CI 316 SS 1 1 ⁄4" x 1" CI CI CI Viton 16CHPCV6 5/8" CI 316 SS 1 1 ⁄2" x 1 1 ⁄4" CI CI CI Viton 19SS = Stainless Steel BR = Bronze CI = Cast Iron(*) Shaft Seal also contains 316 SS stainless steel, ceramic, and carbon components.NOTES: Standard model codes, less motor, are shown as examples.Manufacturer reserves the right to change specifications without notification.Effective 1/1/2011Form 45-SHUsales@shurfloindustrial.comSource: Owner’s Manual L-4076 (12/09)19
Page 3: has a new name “SHURflo Industria
Page 6: CENTRIFUGAL PUMPSSHURflo Close-Coup
Page 9 and 10: SHURflo Close-Coupled Centrifugal P
Page 11 and 12: SHURflo Pedestal-Mount Centrifugal
Page 13 and 14: Pedestal-Mount Centrifugal Pumps316
Page 15 and 16: SHURflo High Head Close-Coupled Cen
Page 17 and 18: SHURflo High Head Close-Coupled Cen
Page 19: SHURflo High Head Pedestal-MountCen
Page 23 and 24: SHURflo Corrosion-Resistant Close-C
Page 25 and 26: SHURflo Corrosion-Resistant Close-C
Page 27 and 28: SHURflo Corrosion-Resistant Pedesta
Page 29 and 30: SHURflo Self-Priming Close-CoupledC
Page 31 and 32: Self-Priming Close-Coupled Centrifu
Page 33 and 34: SHURflo Small Close-Coupled DC Cent
Page 35 and 36: SHURflo Close-Coupled Turbine Pumps
Page 37 and 38: SHURflo 316 Stainless Steel RotaryC
Page 39 and 40: 316 Stainless Steel Rotary Close-Co
Page 41 and 42: SHURflo 316 Stainless Steel RotaryP
Page 43 and 44: Viton Models GPSV2, GPSV4 and GPSV6
Page 45 and 46: SHURflo Heavy-Duty Cast Iron and Br
Page 53 and 54: SHURflo Carbonator-Mount RotaryClos
Page 55 and 56: SHURflo Bronze Plate-Mount RotaryCl
Page 57 and 58: Bronze Plate-Mount Rotary Close-Cou
Page 59 and 60: Light-Duty Pedestal Rotary External
Page 61 and 62: SHURflo NSF Commercial-Duty Filter
Page 63 and 64: aModels NR3, NR5, NR8, NR3-PH, NR5-
Page 65 and 66: SHURflo Commercial-Duty Filter and
Page 67 and 68: SHURflo Carbonator-Mount Hot OilNSF
Page 69 and 70: Cast Iron Models GN60, GN63, GN70 a
Page 71 and 72:
SHURflo 316 Stainless Steel Close-C
Page 73 and 74:
SHURflo Bronze Close-CoupledSelf-Pr
Page 75 and 76:
Models MRB9000, MRB9001, MRB9900,MR
Page 77 and 78:
SHURflo Bronze Pedestal Self-Primin
Page 79 and 80:
SHURflo Heavy-Duty Cast Iron and Br
Page 81 and 82:
C-Face Frame AC Motors for Close-Co
Page 83 and 84:
SHURflo Self-Priming Close-Coupled
Page 85 and 86:
Centrifugal and Turbine Pump Series
Page 87 and 88:
How to Select Rotary Gear Pumps(NOT
Page 89 and 90:
Owner’s Manual Reference ListThe
Page 91 and 92:
CHMCV67CHMPB1XSelf-Priming Close-Co
Page 93 and 94:
ACCESSORIESDC Motors for Small182-1
Page 95 and 96:
Warranty for SHURflo ProductsSHURfl
show all

316 Stainless Steel, Bronze and Cast Iron Models - SHURflo Industrial

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?