316 Stainless Steel, Bronze and Cast Iron Models - SHURflo Industrial

More documents

Recommendations

Info

SHURflo Carbonator-Mount Hot OilNSF Rotary Gear Pumps (Light Duty)Model Ordering Codes and OptionsCOMPONENTGEAR AND ROLLER PUMPSExample Model: GN63Series Gear Size: Ports AC MotorGN - Gear NSFGN 6 36: 1/2"7: 1/2"3 - 1/3 HP1 - 1/2 HP0 - No motor(pump head only)NOTE: Not all order code combinations (configurations) are standard models availablefrom the manufacturer. Custom model configurations may require ordering standardcomponents and/or optional parts that will need to be assembled by the customer.Manufacturer reserves the right to change model order codes, standard models,specifications, and performance without notification.Maximum motor speed is 1725 RPM.Cast Iron construction with Viton o-ring and silicon lip seal.Do not use for water-based fluids.Source: Owner’s Manual L-4090 (3/10)66www.shurfloindustrial.comEffective 1/1/2011Form 45-SHU
Cast Iron Models GN60, GN63, GN70 and GN71SHURflo Carbonator-Mount Hot Oil NSF RotaryClose-Coupled Gear Pumps (Light-Duty)PerformanceGPM Pumping Cooking Oil at 300° FPort Pump Max. Input Suction Free Flow 20 PSI 40 PSI 60 PSI 80 PSIModels Size* RPM Torque in.-lbs. Lift** GPM HP GPM HP GPM HP GPM HP GPM HPModels without MotorsGN60 1/2" 1725 45 5.1 4.4 1/3 4.0 1/3 3.8 1/3 3.5 1/2 3.0 1/2GN70 1/2" 1725 45 6.2 5.2 1/3 4.7 1/3 4.4 1/2 4.3 1/2 4.1 3/4Models with MotorsGN63 1/2" 1725 45 5.1 4.4 1/3 4.0 1/3 3.8 1/3 - - - -GN71 1/2" 1725 45 6.2 5.2 1/3 4.7 1/3 4.4 1/2 4.3 1/2 - -Test data taken on cooking oil at 300° F.Performance in water will decrease by about 10%, and HP required will also be reduced by 10%. (Don’t use water with Cast Iron.)Pump performance when pump is new. As pump wears, the performance will decrease.(*) Female NPT inlet and outlet (in inches).(**) Suction lift (in feet) requires wetted gears and primed seal chamber.NOTES: Pumps with 1/3 HP motors have a max. of 40 PSI, handle up to 100 SSU and specific gravity of 1.1.Pumps with 1/2 HP motors have a max. of 60 PSI, handle up to 100 SSU and specific gravity of 1.1.Pumps without motors have a max. of 80 PSI, handle up to 100 SSU and specific gravity of 1.1.Max. RPM = 1725Max. Input Torque = See chart above.Reverse Rotation = Pumps with or without motors are limited to a max. reverse rotation of 15 PSI.Manufacturer reserves the right to change performance without notification.Price List and Specifications for Pump HeadsPriceList$$$$NEMA Required PUMP CONSTRUCTION (Wet End)Motor Pump Motor Port Body & Shaft ShipModelFrame Max. Shaft Shaft Size Cover Keys & O-Rings Wt.Required RPM Size Dia. NPT* Castings † Gears Bushings Clips Seal** **** (lbs.)Models without MotorsGN60 Carbonator 1725 1/2 slotted 1/2 carbonator 1/2 CI Steel CI 303 SS Silicone Viton 4.7GN70 Carbonator 1725 1/2 slotted 1/2 carbonator 1/2 CI Steel CI 303 SS Silicone Viton 4.3Models with MotorsGN63*** Carbonator 1725 1/2 slotted 1/2 carbonator 1/2 CI Steel CI 303 SS Silicone Viton 22.7GN71*** Carbonator 1725 1/2 slotted 1/2 carbonator 1/2 CI Steel CI 303 SS Silicone Viton 26.3SS = Stainless Steel CI = Cast Iron(*) Female NPT inlet and outlet (in inches).(**) NSF-listed lip seal with 300 Series SS case and spring.(***) Motor specification shown below.(****) NSF-listed material.(†) NSF-listed paint.NOTES:Pump performance when pump is new. As pump wears, the performance will decrease.Manufacturer reserves the right to change specifications without notification.GEAR AND ROLLER PUMPSSpecifications for Pump with MotorsACThermalMotor Motor NEMA Motor Overload Motor MotorModel HP Type Frame Voltage Amps Phase Hz Protection* RPM ShaftGN63 1/3 ODP Carbonator 115/230 6.8/3.4 1 50/60 Yes 1425/1725 1/2 SlottedGN71 1/2 ODP Carbonator 115/230 6.8/3.4 1 50/60 Yes 1425/1725 1/2 SlottedODP = Open Drip-Proof(*) Reset may be automatic or manual.NOTES: Driver data is subject to change without notice; see label on driver for specifications and wiring information.Motor base may be removable, movable or fixed.Manufacturer reserves the right to change specifications without notification.Manufacturer does not specify regulatory compliance for UL, UR, CSA or CE; however most models do comply to UL, UR, CSA and CE.n.To Order Optional MotorsFor custom applications or configurations, select a pump head from above and a Carbonator-Mount motor from the motorsection of this catalog.Source: Owner’s Manual L-4090 (3/10)Effective 1/1/2011Form 45-SHUsales@shurfloindustrial.com67
Page 3:
has a new name “SHURflo Industria
Page 6:
CENTRIFUGAL PUMPSSHURflo Close-Coup
Page 9 and 10:
SHURflo Close-Coupled Centrifugal P
Page 11 and 12:
SHURflo Pedestal-Mount Centrifugal
Page 13 and 14:
Pedestal-Mount Centrifugal Pumps316
Page 15 and 16:
SHURflo High Head Close-Coupled Cen
Page 17 and 18: SHURflo High Head Close-Coupled Cen
Page 19 and 20: SHURflo High Head Pedestal-MountCen
Page 21 and 22: 316 Stainless Steel, Bronze and Cas
Page 23 and 24: SHURflo Corrosion-Resistant Close-C
Page 25 and 26: SHURflo Corrosion-Resistant Close-C
Page 27 and 28: SHURflo Corrosion-Resistant Pedesta
Page 29 and 30: SHURflo Self-Priming Close-CoupledC
Page 31 and 32: Self-Priming Close-Coupled Centrifu
Page 33 and 34: SHURflo Small Close-Coupled DC Cent
Page 35 and 36: SHURflo Close-Coupled Turbine Pumps
Page 37 and 38: SHURflo 316 Stainless Steel RotaryC
Page 39 and 40: 316 Stainless Steel Rotary Close-Co
Page 41 and 42: SHURflo 316 Stainless Steel RotaryP
Page 43 and 44: Viton Models GPSV2, GPSV4 and GPSV6
Page 45 and 46: SHURflo Heavy-Duty Cast Iron and Br
Page 53 and 54: SHURflo Carbonator-Mount RotaryClos
Page 55 and 56: SHURflo Bronze Plate-Mount RotaryCl
Page 57 and 58: Bronze Plate-Mount Rotary Close-Cou
Page 59 and 60: Light-Duty Pedestal Rotary External
Page 61 and 62: SHURflo NSF Commercial-Duty Filter
Page 63 and 64: aModels NR3, NR5, NR8, NR3-PH, NR5-
Page 65 and 66: SHURflo Commercial-Duty Filter and
Page 67: SHURflo Carbonator-Mount Hot OilNSF
Page 71 and 72: SHURflo 316 Stainless Steel Close-C
Page 73 and 74: SHURflo Bronze Close-CoupledSelf-Pr
Page 75 and 76: Models MRB9000, MRB9001, MRB9900,MR
Page 77 and 78: SHURflo Bronze Pedestal Self-Primin
Page 81 and 82: C-Face Frame AC Motors for Close-Co
Page 83 and 84: SHURflo Self-Priming Close-Coupled
Page 85 and 86: Centrifugal and Turbine Pump Series
Page 87 and 88: How to Select Rotary Gear Pumps(NOT
Page 89 and 90: Owner’s Manual Reference ListThe
Page 91 and 92: CHMCV67CHMPB1XSelf-Priming Close-Co
Page 93 and 94: ACCESSORIESDC Motors for Small182-1
Page 95 and 96: Warranty for SHURflo ProductsSHURfl
show all

316 Stainless Steel, Bronze and Cast Iron Models - SHURflo Industrial

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?