316 Stainless Steel, Bronze and Cast Iron Models - SHURflo Industrial

More documents

Recommendations

Info

SHURflo Bronze Plate-Mount RotaryClose-Coupled External Gear PumpsModel Ordering Codes and OptionsExample Model: GFBV33(1) (2) (3) (4) (5GF B V 3 3GEAR AND ROLLER PUMPS1st 2nd 3rd 4th 5thMounting Material Relief Valve Gear Size: Ports AC MotorGF: Plate-mountGear PumpB: Bronze(Buna-N lip seal isstandard, Vitonseal is availablethrough parts only.)V: PressureRelief Valve2: 1/4"3: 3/8"1: 1/4 HP2: 1/3 HP3: 1/2 HPIf blank, motoris not includedwith pump head.NOTE: Not all order code combinations (configurations) are standard models available from the manufacturer.Custom model configurations may require ordering standard components and/or optional parts that will need to beassembled by the customer.Manufacturer reserves the right to change model order codes, standard models, specifications, and performancewithout notification.Maximum motor speed is 1725 RPM.Source: Owner’s Manual L-4084 (12/09)54www.shurfloindustrial.comEffective 1/1/2011Form 45-SHU
Bronze Plate-Mount Rotary Close-Coupled ExternalGear PumpsPerformanceGPM Pumping 10 Wt. Oil at 70° F (500 SSU)Bronze Port Motor RPM Max. Input Suction Free Flow 20 PSI 40 PSI 60 PSI 80 PSI 100 PSIModels Size* HP Torque in.-lbs. Lift** GPM GPM GPM GPM GPM GPMModels with Motors EquippedGFBV22 1/4 1/3 1725 45 3.2 2.2 2.1 2.1 1.7 1.5 1.3GFBV33 3/8 1/2 1725 45 3.6 4.4 4.1 3.8 3.5 3.3 3.0Models without Motors SuggestedGFBV2 1/4 1/3*** 1725 45 3.2 2.2 2.1 2.1 1.7 1.5 1.3GFBV3 3/8 1/2*** 1725 45 3.6 4.4 4.1 3.8 3.5 3.3 3.0Test data taken on SAE 10 wt. oil at 70° F (500 SSU).Pump performance when pump is new. As pump wears, the performance will decrease.(*) NPT inlet and outlet (in inches).(**) Suction lift requires wetted gears and primed seal chamber.(***) Motor not providedNOTES: Pumps with motors are HP rated to handle up to 500 SSU at 100 PSI and specific gravity of 1.0.Max. PSI = 100Max. Viscosity = 500 SSUMax. RPM = 1725Max. Specific Gravity = 1.1 at 100 PSI, up to 1.6 at lower PSI & viscosity.Max. Input Torque = See chart above.Reverse Rotation = Pumps are equipped with pressure relief valves and can be run in reverse rotation; however, pressure relief valve will notfunction when pump is reversed unless pump relief valve cover is rotated 180 degrees. Maximum reverse pressure is 15 PSI or seal damage will occur.The pump relationship between volume (GPM), pressure (PSI), speed (RPM) and horsepower is shown on performance chart in Shertech MotorManual form L-4082. When pumping a more viscous liquid, a slower speed, a larger pipe size pump, and possibly a larger motor should be selected.Driver data is subject to change without notice; see label on driver for specifications and wiring information.Manufacturer reserves the right to change performance without notification.Price List and Specifications$$$$ListPriceNEMAPUMP CONSTRUCTION (Wet End)Motor AC Thermal Port Pressure Relief ShipFrame Motor Motor Motor Motor Insulation Overload Motor Max. Size Body & Relief Valve Pump Seals Wt.Model Required HP Voltage Amps Frame Hz Class Protection Duty Bearings RPM ** Cover Gear Shaft Bushings Valve**** Gasket Gasket *** (lbs.)Models with MotorsGFBV22 48 1/3 115 6.0 ODP 60 A Yes † Cont. Sleeve 1725 1/4 BZ BZ 303 SS CG BR & SS Hard Fiber Vellumoid Buna Lip 20.6GFBV33 48 1/2 115/230 8.2/4.1 ODP 60 B Yes † Cont. Ball 1725 3/8 BZ BZ 303 SS CG BR & SS Hard Fiber Vellumoid Buna Lip 24.8Models without MotorsGFBV2* 48 1/3 - - - - - - - - 1725 1/4 BZ BZ 303 SS CG BR & SS Hard Fiber Vellumoid Buna Lip 4.6GFBV3* 48 1/2 - - - - - - - - 1725 3/8 BZ BZ 303 SS CG BR & SS Hard Fiber Vellumoid Buna Lip 4.8BZ = Bronze BR = Brass SS = Stainless Steel CG = Carbon Graphite ODP = Open Drip-Proof(*) Motor not provided, but suggested. Pump head only provides the ability to adjust HP for viscosity and to use existing and/or special motors.(**) NPT inlet and outlet (in inches).(***) Lip seal components include 303 stainless steel case and garter spring.(****) Models are made of stainless steel (17-7, 300 series and/or 18-8), brass and/or bronze.(†) Thermal overload protection reset may be automatic or manual.NOTES: Motor may be split-phase or capacitor start.Motor base may be removable, movable or fixed.Driver data is subject to change without notice; see label on driver for specifications and wiring information.Manufacturer reserves the right to change specifications without notification.GEAR AND ROLLER PUMPSTo Order Optional MotorsFor custom applications or configurations, select a pump head from above and a Plate-Mount motor from the motor sectionof this catalog.Source: Owner’s Manual L-4084 (12/09)Effective 1/1/2011Form 45-SHUsales@shurfloindustrial.com55
Page 3:
has a new name “SHURflo Industria
Page 6: CENTRIFUGAL PUMPSSHURflo Close-Coup
Page 9 and 10: SHURflo Close-Coupled Centrifugal P
Page 11 and 12: SHURflo Pedestal-Mount Centrifugal
Page 13 and 14: Pedestal-Mount Centrifugal Pumps316
Page 15 and 16: SHURflo High Head Close-Coupled Cen
Page 17 and 18: SHURflo High Head Close-Coupled Cen
Page 19 and 20: SHURflo High Head Pedestal-MountCen
Page 21 and 22: 316 Stainless Steel, Bronze and Cas
Page 23 and 24: SHURflo Corrosion-Resistant Close-C
Page 25 and 26: SHURflo Corrosion-Resistant Close-C
Page 27 and 28: SHURflo Corrosion-Resistant Pedesta
Page 29 and 30: SHURflo Self-Priming Close-CoupledC
Page 31 and 32: Self-Priming Close-Coupled Centrifu
Page 33 and 34: SHURflo Small Close-Coupled DC Cent
Page 35 and 36: SHURflo Close-Coupled Turbine Pumps
Page 37 and 38: SHURflo 316 Stainless Steel RotaryC
Page 39 and 40: 316 Stainless Steel Rotary Close-Co
Page 41 and 42: SHURflo 316 Stainless Steel RotaryP
Page 43 and 44: Viton Models GPSV2, GPSV4 and GPSV6
Page 45 and 46: SHURflo Heavy-Duty Cast Iron and Br
Page 53 and 54: SHURflo Carbonator-Mount RotaryClos
Page 55: SHURflo Bronze Plate-Mount RotaryCl
Page 59 and 60: Light-Duty Pedestal Rotary External
Page 61 and 62: SHURflo NSF Commercial-Duty Filter
Page 63 and 64: aModels NR3, NR5, NR8, NR3-PH, NR5-
Page 65 and 66: SHURflo Commercial-Duty Filter and
Page 67 and 68: SHURflo Carbonator-Mount Hot OilNSF
Page 69 and 70: Cast Iron Models GN60, GN63, GN70 a
Page 71 and 72: SHURflo 316 Stainless Steel Close-C
Page 73 and 74: SHURflo Bronze Close-CoupledSelf-Pr
Page 75 and 76: Models MRB9000, MRB9001, MRB9900,MR
Page 77 and 78: SHURflo Bronze Pedestal Self-Primin
Page 81 and 82: C-Face Frame AC Motors for Close-Co
Page 83 and 84: SHURflo Self-Priming Close-Coupled
Page 85 and 86: Centrifugal and Turbine Pump Series
Page 87 and 88: How to Select Rotary Gear Pumps(NOT
Page 89 and 90: Owner’s Manual Reference ListThe
Page 91 and 92: CHMCV67CHMPB1XSelf-Priming Close-Co
Page 93 and 94: ACCESSORIESDC Motors for Small182-1
Page 95 and 96: Warranty for SHURflo ProductsSHURfl
show all

316 Stainless Steel, Bronze and Cast Iron Models - SHURflo Industrial

Create successful ePaper yourself

Delete template?

Save as template?