PALSUN® - Palram Germany GmbH

More documents

Recommendations

Info

PALSUN ®Cold bendingSmooth and notch-free edges (rounded and/or 45°taperededges) of the PALSUN sheet are necessary to prevent sidecracking during bending.In addition, the bending machine has to be properly adjusted tosheet thickness, ensuring uniform bending.20
• For sheet thickness up to 4 mm, cold line bending shouldusually be restricted to angles between 0° to 90°, in orderto limit the critical elastic strain.• In thicker PALSUN sheets of 6 to12 mm, cold line bendingshould be limited to angles between 0° to 45°.Note:PALSUN ®Cold bendingFollowing bending, residual stresses will remain in the sheetand will reduce the impact strength of the material in thearea along the bend.Therefore, this technique should in general be limited to lessdemanding applications.21
Page 1 and 2: PALSUN ®Flat Rigid Polycarbonate s
Page 3 and 4: PALSUN ®Features and Benefits• H
Page 5 and 6: PALSUN ®Product Warranty• All Pa
Page 7 and 8: 7PALSUN ®Product Range
Page 9 and 10: PALSUN ®Solar UV Protection• Pal
Page 11 and 12: PALSUN ®Chemical Resistance• PAL
Page 13 and 14: 13PALSUN ®Cold curving of PALSUN s
Page 15 and 16: PALSUN ®Thermoforming for intensiv
Page 17 and 18: PALSUN ®Thermoforming• Almost al
Page 19: PALSUN ®Thermoforming• Protectiv
Page 23 and 24: Projects - Athens StadiumFlat Sheet
Page 25 and 26: 25ProjectsVarious Flat Sheet Applic
Page 27 and 28: 27ProjectsTransparent Acoustic Barr
Page 29 and 30: ProjectsAcoustic barrier installati

PALSUN® - Palram Germany GmbH

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?