VRIOGS 003-2-2006 - Public Transport Victoria

VRIOGS 003.2-2006 18Figure 6 : Alternative Active Crossing LayoutGATETACTILE GROUNDSURFACE INDICATORSWINGANGLEGATE* Minimum distance should be increased to allow for curve effects when the track radius is less than600m.All dimensions are from face to face. That is opening dimensions are taken from the inside face of eachbounding member. Structure dimensions are taken from the outside face of bounding members.Part or all of posts C and D facing the rails to be painted or marked to provide a clear luminance contrastwith the background. Yellow paint or chevron hazard marking is deemed to comply with this requirement.The swing angle of the gate shown in the diagram is 108 degrees. If the swing of the actual gate is lessthan this the outer vertical edge of the gate should be marked as described for post D and marking forpost D omitted.NOTE: This Document is controlled only when viewed on the DOI Engineering Standards Web Site. Any other copyof this document is uncontrolled, and the content may be inaccurate.