Emotron DCM Shaft Power Monitor

Technical Data45 x 90 x 115 mm (1.77" x 3.54" x 4.53")Dimension (WxHxD)35 mm(1.38 ’‘ )26 mm(1.02 )’‘90 mm (3.54 )’‘45 mm (1.77’‘ )115 mm (4.53 ’‘)Mounting 35 mm DIN rail 46277WeightSupply voltage (VAC)0.3 kg (10.5 oz)3x100to240,3 x 380 to 500,3 x 525 to 690 (±10%)NOTE: that these are separate voltage units; see table with order numbers on page 4.FrequencyCurrent inputPower consumptionStart-up delayStop delayDigital input terminal 3Temperature input terminal 5Relay outputFuseTerminal wire sizeTerminal tightening torqueRepeatabilitypower measurement45 to 65 HzCurrent transformer CTM010, 025, 050 or 100. (If rated current >100 A, CTM010 and astandard transformer)6VA max.1to170s1to90 sFor closing contact. Internal supply 15 - 30 VDC, shortcircuitcurrent 10 - 20 mAInternal supply 15-30 VDC, short-circuit current 2 mA - 2.5 mA5 A 240 VAC Resistive. 1.5 A 240 VAC Pilot duty/AC1210 A max.Use 75ºC copper (CU) wire only. 0.2 to 4.0 mm² single core (AWG12), 0.2 to 2.5 mm²flexible core (AWG14), stripped length 8 mm (0.32").0.56 - 0.79Nm (5-7 Ib-in)±1 unit 24 h; +20ºC (+68ºF)Temperature tolerance < 0.1% / ºCOperating temperature rangeStorage temperature rangeProtection classRoHS directiveApproved to-20ºC to +50ºC (-4ºF to +122ºF)-30ºC to +80ºC (-22ºF to +176ºF)IP202002/95/ECCE (up to 690 VAC), UL and cUL (up to 600 VAC)3 CG Drives & Automation 01-5964-01r0