<strong>Basic</strong> Submittal – Bare <strong>Deck</strong>AC25 - Compatibility with Fire Proofing Materials<strong>BlazeFrame</strong> profiles are third party certified and listed by Underwriter's Laboratory to becompatible with fire-proofed substrates listed in UL Fire Resistance Directory.Application requirements of fire proofing materials (covered by individual assemblylistings), Manufacturer, and brand names of fire proofing materials can be found in D700/D900, P700/P900, and P800 series assemblies.(Example) - UL Listing D902 certification includes:ISOLATEK INTERNATIONAL — Type D-C/F, HP, Type II, Type EBS or TypeISOLATEK INTERNATIONAL — Type 280.ISOLATEK INTERNATIONAL — Types 800, M-II or TG. Types 800, M-II and TGInvestigated for exterior use.NEWKEM PRODUCTS CORP — Types M-II or TG. Types M-II and TG Investigatedfor exterior use.LUCKY CORE INSULATING MATERIAL MANUFACTURING L L C — TypesM-II or TG. Types M-II and TG Investigated for exterior use.BERLIN CO LTD — Types 300, 300ES, 300N or SB.ISOLATEK INTERNATIONAL — Type 300, Type 300ES, Type 300N, or Type SB.NEWKEM PRODUCTS CORP — Type 300, Type 300ES, Type 300N, or Type SB.ISOLATEK INTERNATIONAL — Type 300TW, Type 400.NEWKEM PRODUCTS CORP — Type 400.Etc...(Example) - UL listing D905 certification includes:ARABIAN VERMICULITE INDUSTRIES — Type MK-5.GRACE KOREA INC — Types MK-6/CBF, MK-6/ED, MK-6/HY, MK-6s, MonokoteAcoustic 1 .PYROK INC — Type LD.SOUTHWEST FIREPROOFING PRODUCTS CO — Types 4, 5, 5EF, 5GP, 5MD,7GP, 7HD, 8EF, 8GP, 8MD, 9EF, 9GP, 9MD.W R GRACE & CO - CONN — Types MK-4, MK-5, MK-6/HY, MK-6s, MonokoteAcoustic 1 , RG .Installation and use of <strong>BlazeFrame</strong> profiles in assemblies having a fire-proofed substrateare specified in individual HW-D listings. Directory of <strong>BlazeFrame</strong> UL listings withdirect link to UL listings at www.ul.com are available at www.blazeframe.comwww.blazeframe.com 15
<strong>Basic</strong> Submittal – Bare <strong>Deck</strong>AC27 - Chemical Compatibility with Sealants<strong>BlazeFrame</strong> steel/intumescent composite joint framing/protection profiles are producedusing a cured intumescent acting as the "fill, void, cavity" materials with a polyester outercoating. The intumescent portion of the composite profile is chemically compatible with"non-solvent" based materials (i.e. caulks, mud, paints, fire proofing, etc..) and as suchwill be unaffected and not degrade where contact may occur.Current sealant manufacturer's products verified as non-solvent and compatible with<strong>BlazeFrame</strong> profiles are:Rectorseal:Metacaulk - 1000, 350i, MC 150+, 950, 1100, 1200, 1500Biostop - 500+, 350i, BF 150+, 700, 750, 800Flamesafe - FS1900, FS 900+, FS3000United States Gypsum (USG):Type ASOther brand names may be acceptable based on individual manufacturer of specific brandproviding verification of materials being "non-solvent" and will allow/warranty use ofthem in applicable conditions.www.blazeframe.com 16