12.07.2015 Views

Service Bulletin - GippsAero

Service Bulletin - GippsAero

Service Bulletin - GippsAero

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

RemoveFigure 1 – Pitch gate attachmentFigure 2 – Throttle quadrant placardsSB-GA8-2005-10 Issue: 1 Date of Issue: 16 August 2005 Page 3 of 4


Tachometer Replacement1. Remove existing tachometer and replace with new tachometer (P/N GA8-771013-9).Alternatively, the existing tachometer may be reworked by re-marking the existing red arc between2500 rpm and 2700 rpm with a yellow arc. Refer to Figure 3. Re-identify the tachometer as GA8-771013-9.Documentation:Figure 3 – Tachometer marking1. For aircraft using Flight Manual C01-01-01, replace it with Flight Manual C01-01-06 dated 8 August2005 or later CASA approved revision.ORFor aircraft using Flight Manual C01-01-03, replace it with Flight Manual C01-01-07 dated 8 August2005 or later CASA approved revision.When replacing the flight manual, transfer any weight and balance amendments and supplements tothe new manual.2. Update aircraft log book to reflect incorporation of this <strong>Service</strong> <strong>Bulletin</strong>.Compliance Notice:Complete the Document Compliance Notice and return to Gippsland Aeronautics by fax/mail.SB-GA8-2005-10 Issue: 1 Date of Issue: 16 August 2005 Page 4 of 4


DOCUMENT COMPLIANCE NOTICEDocument: <strong>Service</strong> <strong>Bulletin</strong> SB-GA8-2005-10Aircraft Serial Number:GA8-______________I/we have incorporated <strong>Service</strong> <strong>Bulletin</strong> SB-GA8-2005-10 for the above aircraft.________________________________________Signed________________________________________Print NamePlease post or fax this compliance notice to:Gippsland AeronauticsAttn: Technical <strong>Service</strong>sP.O. Box 881Morwell Victoria 3840AustraliaFax.: +61 03 5172 1201Form GA-???

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!