12.07.2015 Views

Specifications - Huryn Justice General Contractors

Specifications - Huryn Justice General Contractors

Specifications - Huryn Justice General Contractors

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Repairs to Covered Storage Building AS-4171 05110173(3) Sample of Materials Exceeding 8 1/2 by 11 inches: Cut down to8 1/2 by 11 inches and adequate to indicate color, texture, andmaterial variations.(4) Sample of Linear Devices or Materials: 10 inch length orlength to be supplied, if less than 10 inches. Examples of lineardevices or materials are conduit and handrails.(5) Sample of Non-Solid Materials: Pint. Examples of non-solidmaterials are sand and paint.(6) Color Selection Samples: 2 by 4 inches.(7) Sample Panel: 4 by 4 feet.(8) Sample Installation: 100 square feet.b. Samples Showing Range of Variation: Where variations areunavoidable due to nature of the materials, submit sets of samplesof not less than three units showing extremes and middle of range.c. Reusable Samples: Incorporate returned samples into work only ifso specified or indicated. Incorporated samples shall be inundamaged condition at time of use.d. Recording of Sample Installation: Note and preserve the notationof area constituting sample installation but remove notation atfinal clean up of project.e. When color, texture or pattern is specified by naming a particularmanufacturer and style, include one sample of that manufacturerand style, for comparison.1.6.7 Format of Administrative Submittalsa. When submittal includes a document which is to be used in projector become part of project record, other than as a submittal, donot apply contractor's approval stamp to document, but to aseparate sheet accompanying document.1.7 QUANTITY OF SUBMITTALS1.7.1 Number of Copies of Product Dataa. Submit five copies of submittals of product data requiring reviewand approval only by the Contracting Officer. Submit three copiesof submittals of product data for operation and maintenancemanuals.1.7.2 Number of Copies of Shop DrawingsSubmit shop drawings in compliance with quantity requirements specified forproduct data.1.7.3 Number of Samplesa. Submit two samples, or two sets of samples showing range ofvariation, of each required item. One approved sample or set ofsamples will be retained by approving authority and one will beSECTION 01 33 00 Page 11

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!