EasyCare Tx - Teknikel

EasyCare TxTITRATION SOLUTIONFor win–win resultsEasyCare Tx with Tx Link—the titration solution that works with a wide range of ResMedtherapy devices, offering user-friendly remote control of the therapy device, whiledisplaying real-time information. It’s easy and efficient for sleep labs, better for patientsand adaptable for therapy outcomes ... a win–win for all!EasyCare Tx Software• Remotely controls the therapy device settings• Displays real-time data from the therapy device• Supports the capability of ResMed’s VPAP TxLab System, allowing the device to smoothlytransition from one mode to another withoutdisrupting the patient• Creates summary reports and prescriptions• EasyCare Tx is designed to run on the same PCas the polysomnography (PSG) software—the graphicinterface minimises screen space; informationfrom the therapy device, such as pressure, flowand leak, is imported into the PSG header boxvia analogue DC outputs from the Tx Link• Future software upgrades available onsite,via simple internet downloads• Context-sensitive online helpTx Link• Provides connectivity between the software andtherapy device• Relays real-time signals measured by the therapydevice to the PSG equipmentResMed titration systemsOvernight success

FROM QUICK SET-UP TO CONSISTENT OUTCOMES—A WIN–WIN ALL THE WAYQuick set-up• Patient can be settled and ready fortitration quickly• Sleep quality and therapy acceptanceare maximised with unique comforttechnologiesEasy to use• Intuitive navigation, helpful tips andcontext-sensitive online help• Simple user interface withEasyCare Tx• Easy verification of DC signal• Easy monitoring—accurate andadequate information for wellinformedtherapy decisionsMaximised efficiency• Reduced training time and overheads• Standard defaults can be customisedto your lab and standardised withinyour lab• Efficient upgrades—compatible withfuture therapy devicesConsistent titration and therapyoutcomes• Precise—true leak, accurate pressureand flow with VPAP Tx• Accurate—reporting of unintentionalmask leak with configurable leak alertRecommended Hardwarerequirements• PC (Mac not supported)• Pentium 1 Ghz CPU• 1 GB RAM• 1024 x 768 display resolution• 10/100 Mbps Ethernet PortMinimum software requirements• Microsoft Windows 2000 SP4 orWindows XP SP2 or Windows Vista• Microsoft .NET Framework 2.0• A portable document reader, eg,Adobe ® Reader ®cable requirements• Cat 5 cable or higher, or availablenetwork port between patient room andcontrol roomProduct codes (EUROPE)Tx Link and EasyCare Tx 25101VPAP Tx Europe 25104VPAP Tx GmbH 25105HumidAire H2i Polycarbonate(Europe Group 1) 30903HumidAire H2i Polycarbonate(Europe Group 2) 30922HumidAire H2i UDEL(Europe Group 1) 30973HumidAire H2i UDEL(Europe Group 2) 30974Filters (3-Pack) 26912Filters (6-Pack) 26920Manufacturer: ResMed Ltd 1 Elizabeth MacArthur Drive Bella Vista NSW 2153 Australia. Distributed by: ResMed Corp 9001 Spectrum Center Boulevard San Diego CA 92123 USA; ResMed (UK) Ltd 96 Milton ParkAbingdon Oxfordshire OX14 4RY UK. See www.resmed.com for other ResMed locations worldwide. HumidAire 2i and VPAP Tx are trademarks of ResMed Ltd and VPAP is registered in U.S. Patent and TrademarkOffice. Microsoft, Windows and Vista are either registered trademarks or trademarks in the United States and/or other countries of Microsoft Corporation. Adobe Reader is either a registered trademark ortrademark in the United States and/or other countries, of Adobe Systems Incorporated. © 2010 ResMed Ltd. Specifications may change without notice. 1013597/1 10 02Global leaders in sleep and respiratory medicine www.resmed.com