Hommel-Etamic DIGITAMIC Digital reference gage - Teknikel

OPTICAL SYSTEMS LASERS & MATERIAL PROCESSING INDUSTRIAL METROLOGY TRAFFIC SOLUTIONS DEFENSE & CIVIL SYSTEMSHommel-Etamic DIGITAMICDigital reference gage• Used with one or two inductiveprobes, the DIGITAMIC performshighly accurate dimensional measurements• Easy to operate, even by untrainedusers, no adjustment necessary• The DIGITAMIC is based on the principleof inductive measurement andtherefore offers the following advantages:- Measurement in harsh workshopconditions- High measuring range- Large choice of probes- Easy to set-up and use- Static or dynamic measurements- Stacking possibility for up to 8DIGITAMIC gages- Data exchange via RS232interfacePrecision is our business.

Hommel-Etamic DIGITAMICFunctionalitiesDisplay- Actual dimension or difference from a floating zero- Metric or inch- Color display work piece OK/NOKMeasurement- Simple or differential- Direct reading- Dynamic gaging with „hold“ feature: Max., Min.m T.I.R., (Max.+Min.)/2- Adjustable tolerance linesMastering- With one master: zero adjustment within part specification limits- With one set of min-max masters: automatic adjustment ofamplification coefficientTechnical characteristicsThe module aspect of the DIGITAMIC simplifies the connection anddata exchange between units and/or external network.Probe typesProbe connectionMeasurement range(depending on probe)AccuracyDigital displayProtectionOperating temperatureElectric power supplyStackingInterfaceInductive probes (LVDT)6-pin socketFrom ±10 to ±10000 µm1% of the measurement range8 digits, retro-illuminatedIP65From +5°C to+50°C220/110V AC8 units using one single power supplyRS232JENOPTIK I Industrial MetrologyHOMMEL-ETAMIC France SA I ZA Damigny I Rue de la Cartoucherie I Saint-Martin-des-EntréesBP 61080 I 14406 Bayeux Cedex I France I Phone +33 231 51 3751 I Fax +33 231 21 1361E-Mail: info.fr@hommel-etamic.com I www.hommel-etamic.comDB_DIGITAMIC_EN 21.01.2009 Subject to change without notice.