Trade Price List - Polypipe

More documents

Recommendations

Info

POLYFIT JOINTING, DISMANTLING & SYSTEM TESTINGJointingThere are four stages tosuccessfully jointing the Polyfitsystem.1. Cutting Polyfit PipeFirstly check that the pipe is not scoredor scratched in any way and if it is socut back to a point where there is nodamage present.Using a Polyfit pipe cutter cut the pipesquarely using the “K” marks on thepipe as a guide.Cutting of Polyfit pipe2. Use of pipe stiffenerInsert a pipe stiffener into the pipe(not required on copper pipes).3. Inserting pipe fully into fittingPush pipe into the fitting, ensuringit is inserted to the full socket depthdenoted by the next “K” mark onthe pipe.Insertion depth markers on fittingsEach fitting now has an insertion depthmarker on the fitting body to aid withinstallation. The only way of being certainthat a joint has been completedsuccessfully is by using the insertion depthmarks on the pipe for cutting andinsertion purposes.Fitting the joint4. Checking joint securityTug back on pipe to check it isinserted fully.Fitting with copper pipeConnecting Polyfit to copper pipes.Cut the copper pipe using a rotationalpipe cutter. Mark the copper pipeinsertion depth as shown in the tablebelow. Follow steps 3 and 4 using themark as a socket depth guide.Pipe diameter (mm)10 15 22 28Insertion depth (mm)25 35 42 44Demounting a Polyfit jointPolyfit fittings are fully demountableand re-usable. To demount a Polyfitfitting simply depress the colletsquarely towards the fitting and pullthe pipe out of the fitting. Whensystems have been pressurised thecollet is designed to grip into the pipetherefore using a fitting release aid(product code FITAID) will assist indemounting fittings.System testingPressure testing of systems isrecommended.1st fix installationsOnly pipe and fittings should betested. The system should becompletely filled using water at amaximum of 20°C and a test pressureof 18 Bar, which should be applied forat least 15 minutes and no longerthan 1 hour. Joint security can bechecked visually and by tugging atjoints.2nd fix installationsComplete installations, includingappliances, should be tested withwater to the maximum test pressureallowed by the manufacturers. Airtesting is not recommended.Please note, due to health and safetyreasons <strong>Polypipe</strong> do not recommendair testing of pipework installations.Inserting the pipe stiffenerSecuring the jointPolyfit Flexible ConnectorsFlexible hose connectors are the latest great addition to the Polyfit product range. This versatile collection comes in a wide range of length and connection endcombinations to suit every need. Many of our flexible connectors include the Polyfit one step joint feature, which are quick and easy to install and are ideal for use intricky to reach or tight locations.• All Polyfit flexible connectors are listed under the Water Regulations Advisory Scheme. Look out for the black thread that is wound into each hose, which denotes aWRAS quality product. Each EPDM hose is suitable for use in domestic hot and cold water applications• All Polyfit hoses which have a tap connector nut now contain captive rubber seals ensuring that seals are not lost or damaged on site.• Polyfit flexible hoses come in a packaging design which aids quick and easy product selection and all hoses come in pairs.See pages 18-19 for details.Selecting your Polyfit Flexible ConnectorPolyfit Fitting15mm and 22mmPolyfit push fit connections…just push, click, Polyfit endsare secure in use but also fullydemountable and reusablePolyfit Chrome PlatedValve 15mm and 22mmConnectors incorporatingservice valves to reduce thenumber of joints withina system. Incorporates thePolyfit push fit featureTap Connection Nut1/2” and 3/4”These “wing nut” style tapconnector nuts will onlyrequire hand tighteningCompression Fitting15mm and 22mmOur compression endconnectors use the samehigh quality componentsas the rest of thePolyfit push fit range18<strong>Price</strong>s shown are for one item excluding VAT (unless otherwise stated). Note: Orders must be in pack quantity multiples.
POLYFIT PIPE AND FITTINGS - 10,15,22 & 28mm O.D.COMPONENTPRODUCT PACK CODE PRICEDESCRIPTION QUANTITY NUMBER EACH £Barrier Polybutylene Pipe Cut Length15mm x 2 metre Cut Length 10 FIT215B 3.4315mm x 3 metre Cut Length 10 FIT315B 5.0515mm x 6 metre Cut Length 10 FIT615B 9.8922mm x 2 metre Cut Length 10 FIT222B 6.5822mm x 3 metre Cut Length 10 FIT322B 9.5622mm x 6 metre Cut Length 10 FIT622B 18.4428mm x 3 metre Cut Length 10 FIT328B 14.1428mm x 6 metre Cut Length 10 FIT628B 28.11End sectionBarrier Polybutylene Pipe Coils(featuring “Plumb Straight” Coiling Technology)10mm x 25 metre Coil 1 FIT2510B 33.5110mm x 50 metre Coil 1 FIT5010B 69.6310mm x 100 metre Coil 1 FIT10010B 134.0615mm x 25 metre Coil 1 FIT2515B 39.9815mm x 50 metre Coil 1 FIT5015B 79.9515mm x 100 metre Coil 1 FIT10015B 158.9615mm x 120 metre Coil 1 FIT12015B 190.7415mm x 150 metre Coil 1 FIT15015B 238.2122mm x 25 metre Coil 1 FIT2522B 77.9922mm x 50 metre Coil 1 FIT5022B 151.4428mm x 25 metre Coil 1 FIT2528B 87.0528mm x 50 metre Coil 1 FIT5028B 172.17Conduit Pipe Coils (Polypropylene)15mm x 25 metre Conduit Pipe Coil (Black) 1 CPC1525 21.9015mm x 50 metre Conduit Pipe Coil (Black) 1 CPC1550 44.0422mm x 25 metre Conduit Pipe Coil (Black) 1 CPC2225 27.3622mm x 50 metre Conduit Pipe Coil (Black) 1 CPC2250 55.0315mm x 25 metre Conduit Pipe Coil (Red) 1 CPC1525R 23.6515mm x 50 metre Conduit Pipe Coil (Red) 1 CPC1550R 47.5522mm x 25 metre Conduit Pipe Coil (Red) 1 CPC2225R 31.7322mm x 50 metre Conduit Pipe Coil (Red) 1 CPC2250R 63.8315mm x 25 metre Conduit Pipe Coil (Blue) 1 CPC1525BU 23.6515mm x 50 metre Conduit Pipe Coil (Blue) 1 CPC1550BU 47.5522mm x 25 metre Conduit Pipe Coil (Blue) 1 CPC2225BU 31.7322mm x 50 metre Conduit Pipe Coil (Blue) 1 CPC2250BU 63.83Straight Coupler10mm Straight Coupler 10 FIT010 1.7515mm Straight Coupler 10 FIT015 1.2922mm Straight Coupler 10 FIT022 2.0428mm Straight Coupler 10 FIT028 5.25Elbow10mm Elbow 10 FIT110 2.1515mm Elbow 10 FIT115 1.5322mm Elbow 10 FIT122 2.4328mm Elbow 10 FIT128 6.00Spigot Elbow10mm Spigot Elbow 10 FIT1010 2.6610mm x 15mm Spigot Elbow 10 FIT101510 2.8315mm Spigot Elbow 10 FIT1015 3.0022mm Spigot Elbow (not suitable for use with compression fittings) 10 FIT1022 4.57For further information log onto www.totallyplumbing.com 19
Page 1 and 2: Plumbing & Heating SystemsP&HTPL5 A
Page 4 and 5: Polyplumb SystemPolyplumb is an int
Page 6 and 7: POLYPLUMB JOINTING, DISMANTLING AND
Page 8 and 9: POLYPLUMB STANDARD & BARRIER PIPE -
Page 10 and 11: POLYPLUMB FITTINGS - 10, 15, 22 & 2
Page 12 and 13: POLYPLUMB FITTINGS - 10, 15, 22 & 2
Page 14 and 15: POLYPLUMB ANCILLARIESAll prices sho
Page 16 and 17: Polyfit SystemPolyfit is the one st
Page 20 and 21: POLYFIT FITTINGS - 10,15,22 & 28mm
Page 22 and 23: POLYFIT FITTINGS - 10,15,22 & 28mm
Page 24 and 25: POLYFIT ANCILLARIES - ALL PRICES SH
Page 26 and 27: Polysure SystemPolysure is a range
Page 28 and 29: POLYSURE JOINTING AND SYSTEM TESTIN
Page 30 and 31: POLYPLUMB STANDARD AND BARRIER PIPE
Page 32 and 33: TOOLS AND EQUIPMENTCOMPONENTPRODUCT
Page 34 and 35: APPLICATION INFORMATIONThe followin
Page 36: Trade Price ListPlumbing & Heating

Trade Price List - Polypipe

Create successful ePaper yourself

Delete template?

Save as template?