Inside Corners Aluminum SI Series Pittcon Industries - DCS® Metal ...

SCS-3XCUSTOM CORNER STEPSAMPLE SPECIFICATIONspecify as: SOFTFORMS ® Model # SCS-3XPittcon SOFTFORMS ® LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, MD 20737 Phoenix, AZ 85017(800) 637-7638 (800) 637-7638(301) 927-1000 (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400The formed extruded aluminum profile profile shall incorporate shall incorporate a continuous a continuous integralintegral fin for surface fin for surface contact to contact conventionally to conventionally installed installed gypsum gypsum drywall.drywall. The formed The profile fins shall shall be 7/8" be primed wide and with shall corrosion-resistant be tapered to the primer edge.The compatible tapered with fins shall materials be punched normally with in holes use staggered in conjunction to accept withstandard commercial screw interiors, fastening. i.e.: joint A series compound, of continuous latex and grooves enamel shall paints, beextruded and wall covering into the face adhesives. of the fins to provide greater bonding surface.The extruded profiles shall be primed with corrosion-resistantprimer compatible with materials normally in use in conjunction withcommercial MATERIAL: interiors, Aluminum i.e.: joint alloy................3003 compound, latex and H-14 enamel or paints, equaland wall covering Finish......................................Factory adhesives.primedMetal Thickness........................ .090" typicalMATERIAL: Aluminum alloy............6063 T5 or equalNote: Other thicknesses ranging from .062" to .125" are availableupon Finish..............................Factory request, with some restrictions applying. primedCheckfactory for your needs.1"(25.4 mm)NominalSCS-3XNO SCALE1/2"(12.7 mm)NominalNOTE: Larger Sizes AreAvailable.2"(50.8 mm)TYP2"(50.8 mm)TYP1-1/2"(38.1 mm)NominalTRIPLE CORNER STEPSECTIONEXAMPLE DETAILFor use with 1/2" or 5/8" GPDW ceilings.The SCS-3X may be used horizontally or vertically to create amultistep corner in widths specified. Screws through the taperedfins must always engage metal or wood substructure to ensureproper installation.SCS-3XTAPE &SPACKLETAPE &SPACKLEMETALSTUDS1/2" OR 5/8"GPDWSCS-3XNO SCALESTUD WALLPLAN/SECTIONAll details, methods and specifications are the exclusive property of PittconSoftforms ® LLC. Pittcon reserves the right to change any specifications ordetails without prior notification. All Softforms ® profiles are available instandard 10' lengths ±1/8" (2.048 M). Other lengths are available as specialorder items. For custom shapes, sizes, or for special finishes, please contactthe factory or your nearest Pittcon sales representative.PREFORMED ARCHITECTURAL PROFILESFOR DRYWALL CONSTRUCTION© 2008 Pittcon SOFTFORMS ® LLCSO 49®