Inside Corners Aluminum SI Series Pittcon Industries - DCSÂ® Metal ...

More documents

Recommendations

Info

SO/SI-LRTCUSTOM INSIDE/OUTSIDECORNER SETSAMPLE SPECIFICATIONspecify as: SOFTFORMS ® Model # SO/SI-LRTPittcon SOFTFORMS ® LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, MD 20737 Phoenix, AZ 85017(800) 637-7638 (800) 637-7638(301) 927-1000 (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400The formed extruded aluminum profile profile shall incorporate shall incorporate a continuous a continuous integralintegral fin for surface fin for surface contact to contact conventionally to conventionally installed installed gypsum gypsum drywall.drywall. The formed The profile fins shall shall be 7/8" be primed wide and with shall corrosion-resistant be tapered to the primer edge.The compatible tapered with fins shall materials be punched normally with in holes use staggered in conjunction to accept withstandard commercial screw interiors, fastening. i.e.: joint A series compound, of continuous latex and grooves enamel shall paints, beextruded and wall covering into the face adhesives. of the fins to provide greater bonding surface.The extruded profiles shall be primed with corrosion-resistantprimer compatible with materials normally in use in conjunction withcommercial MATERIAL: interiors, Aluminum i.e.: joint alloy................3003 compound, latex and H-14 enamel or paints, equaland wall covering Finish......................................Factory adhesives.primedMetal Thickness........................ .090" typicalMATERIAL: Aluminum alloy............6063 T5 or equalNote: Other thicknesses ranging from .062" to .125" are availableupon Finish..............................Factory request, with some restrictions applying. primedCheckfactory for your needs.1"(25.4 mm)NominalSPECIFYWALLTHICKNESSSO/SI-LRTNO SCALE1/2"(12.7 mm)Nominal6" (152.4 mm) MINIMUM RADIUSSPECIFYANGLENOTE: Larger Sizes AreAvailable.1-1/2"(38.1 mm)NominalINSIDE/OUTSIDE CORNER SETSECTIONEXAMPLE DETAILFor use with conventional metal stud construction and 1/2" or 5/8" GPDW.The SO/SI-LRT set is a constant thickness inside/outside corner fordrywall constructions similar to that depicted here. Screws through theinstallation fins must always engage metal or wood substructure to ensureproper installation.SO-LRTADDITIONALMETAL STUDSAS REQUIREDSI-LRT1/2" OR 5/8"GPDWTAPE &SPACKLETAPE &SPACKLESO/SI-LRT STUD WALLNO SCALEPLAN/SECTIONAll details, methods and specifications are the exclusive property of PittconSoftforms ® LLC. Pittcon reserves the right to change any specifications ordetails without prior notification. All Softforms ® profiles are available instandard 10' lengths ±1/8" (2.048 M). Other lengths are available as specialorder items. For custom shapes, sizes, or for special finishes, please contactthe factory or your nearest Pittcon sales representative.© 2008 Pittcon SOFTFORMS ® LLCPREFORMED ARCHITECTURAL PROFILESFOR DRYWALL CONSTRUCTION®SO 54
FloridaThomas SchreiberMiami, IwSales Representativetom@dcs-sales.com(407) 648-5348 Phone(407) 505-4336 Faxwww.dcs-sales.com8805 Tamiami Trail North, Suite 107Naples, FL 34108Puerto Rico, US Virgin Islands - CaribbeanIsland groups-Lucayan ArchipelagoGreater Antilles, Lesser Antilles, Bahamas
Page 3 and 4: SO-HSN-90HIGH STRENGTH CORNERSAMPLE
Page 5 and 6: SO-R060-90FABRIC TUCK CORNERSAMPLE
Page 7 and 8: SO-45A45° OUTSIDE CORNERSAMPLE SPE
Page 9 and 10: SO-9-075CCHAMFERED CORNERSAMPLE SPE
Page 11 and 12: SCS-2X(050-050)DOUBLE CORNER STEP 1
Page 13 and 14: SCS-2X(100-100)DOUBLE CORNER STEP 1
Page 15 and 16: SCS-3X(063-063)TRIPLE CORNER STEP 5
Page 17 and 18: SCS-3XCUSTOM CORNER STEPSAMPLE SPEC
Page 19 and 20: SO-LRPCUSTOM OUTSIDE CORNERWith Per
Page 21: SO-LRPTCUSTOM OUTSIDE CORNERWith On

Inside Corners Aluminum SI Series Pittcon Industries - DCSÂ® Metal ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?