Inside Corners Aluminum SI Series Pittcon Industries - DCS® Metal ...

SO-LRPTCUSTOM OUTSIDE CORNERWith One Perpendicular FinSAMPLE SPECIFICATIONspecify as: SOFTFORMS ® Model # SO-LRPTPittcon SOFTFORMS ® LLC6409 Rhode Island Avenue 3330 W. Flower StreetRiverdale, MD 20737 Phoenix, AZ 85017(800) 637-7638 (800) 637-7638(301) 927-1000 (602) 233-9100Fax: (301) 699-8690 Fax: (602) 233-9400The formed extruded aluminum aluminum profile profile shall incorporate shall incorporate a continuous a continuous integralfin integral for surface fin for contact surface to contact conventionally to conventionally installed installed gypsum gypsum drywall.The drywall. formed The profile fins shall shall be be 7/8" primed wide and with shall corrosion-resistant be tapered to the primer edge.compatible The tapered with fins shall materials be punched normally with in holes use staggered in conjunction to accept withcommercial standard screw interiors, fastening. i.e.: joint A series compound, of continuous latex and grooves enamel shall paints, beand extruded wall covering into the face adhesives. of the fins to provide greater bonding surface.The extruded profiles shall be primed with corrosion-resistantprimer compatible with materials normally in use in conjunction withMATERIAL: commercial interiors, Aluminum i.e.: joint alloy................3003 compound, latex and H-14 enamel or paints, equaland wall covering Finish......................................Factory adhesives.primedMetal Thickness........................ .090" typicalMATERIAL: Aluminum alloy............6063 T5 or equalNote: Other thicknesses ranging from .062" to .125" are availableupon Finish..............................Factory request, with some restrictions applying. primed Checkfactory for your needs.SO-LRPTNO SCALE6" (152.4 mm) MINIMUM RADIUSSPECIFYANGLENOTE: Larger Sizes AreAvailable.1/2"(12.7 mm)Nominal1"(25.4 mm)NominalOUTSIDE CORNERW/ONE PERPENDICULAR FINEXAMPLE DETAILFor use with conventional metal stud construction and 1/2" or 5/8"GPDW.The SO-LRPT is a large radius outside corner or column withperpendicular fins for corner drywall constructions similar to thatdepicted here. Screws through the grooved fins must alwaysengage metal or wood substructure to ensure proper installation.SO-LRPTMETALSTUDTAPE &SPACKLETAPE &SPACKLE1/2" OR 5/8"GPDWSO-LRPT CUSTOM CORNERNO SCALEPLAN/SECTIONAll details, methods and specifications are the exclusive property of PittconSoftforms ® LLC. Pittcon reserves the right to change any specifications ordetails without prior notification. All Softforms ® profiles are available instandard 10' lengths ±1/8" (2.048 M). Other lengths are available as specialorder items. For custom shapes, sizes, or for special finishes, please contactthe factory or your nearest Pittcon sales representative.PREFORMED ARCHITECTURAL PROFILESFOR DRYWALL CONSTRUCTION© 2008 Pittcon SOFTFORMS ® LLCSO 53®