03 Sport Instructions - Mamas & Papas

More documents

Recommendations

Info

FITTING THE WHEELSFitting the front wheel:Place the folded pushchairon a flat work surface withthe forks facing up.Align the holes in the plastichubs with the ends of theforks and slot themtogether. Ensure thesuspension mechanism ispositioned at the back ofthe forks.Push down on the wheeluntil the two locking pins inthe forks spring into thecorresponding holes in theplastic hubs.Suspension mechanismForksRear wheelhousingsFitting the rear wheels:Slot the pin on the rearwheel into the hole in theend of the rear wheelhousing.Test the wheel is correctlyfitted by pulling it.Repeat the procedure toattach the second wheel.5
OPENING THE PUSHCHAIR FOR THE FIRST TIMELocate the frame lock onthe right hand side of thepushchair frame anddisengage it from the stud.Frame lockGrip the front wheel andpull it up to unfold thepushchair.When the pushchair isalmost fully open, pull thewheel up sharply to lockthe frame open.Adjusting the handlebars:Locate the two handlebaradjustment buttons oneither side of thehandlebars and push themin. With the buttons heldin, unfold the handlebarsand rotate them to thedesired position. Releasethe buttons to lock thehandlebars in position.Important: Check that thelocks are fully engaged byattempting to push thehandlebars forwards as ifyou were folding thepushchair.6
Page 1 and 2: instructions03 Sportswivel wheel pu
Page 3 and 4: PRODUCT INFORMATIONThis pushchair h
Page 5: 03 SPORT SWIVEL WHEEL PUSHCHAIRBack
Page 9 and 10: FITTING THE HOODSlot the back of th
Page 11 and 12: ADJUSTING THE LEGRESTRaising the le
Page 13 and 14: USING AND ADJUSTING THE SAFETY HARN
Page 15 and 16: FOLDING THE PUSHCHAIRImportant: Bef
Page 17 and 18: ATTACHING THE PRIMO VIAGGIO CAR SEA
Page 19 and 20: OPENING THE PUSHCHAIRLocate the fra
Page 21 and 22: REMOVING THE FABRIC COVERAdjust the
Page 23 and 24: CARE & MAINTENANCEYour pushchair is

03 Sport Instructions - Mamas & Papas

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?