User Manual for the NETGEAR 54 Mbps Wireless PC Card WG511v2

User Manual for the NETGEAR 54 Mbps Wireless PC Card WG511v2Table 1-1. A Road Map for How to Get There From Here ...If I Want To ... ? What Do I Do? What’s Needed? How Do I?Use printers ina combinedwireless andwirednetwork.1. Use theWindowsPrinters andFax features tolocateavailableprinters in thecombinedwireless andwired network.2. Use theWindows Adda Printerwizard to addaccess to anetwork printerfrom thenotebook PCyou are usingto wirelesslyconnect to thenetwork.3. From the Filemenu of anapplicationsuch asMicrosoftWord, use thePrint Setupfeature todirect yourprint output tothe printer inthe network.1. The notebook computer I amusing to connect to thewireless network needs to beconfigured with the WindowsClient and File and PrintSharing.2. The notebook computer I amusing to connect to thewireless network needs to beconfigured with the sameWindows Workgroup orDomain settings as the otherWindows computers in thecombined wireless and wirednetwork.3. Any Windows networkingsecurity access rights such aslogin user name/ passwordthat have been assigned in theWindows network must beprovided when Windowsprompts for such information.4. If so-called Windows ‘peer’networking is being used, theprinter needs to be enabled forsharing.Windows Domain settings areusually managed by corporatecomputer support groups.Windows Workgroup settingsare commonly managed byindividuals who want to set upsmall networks in their homes, orsmall offices.For assistance with setting upWindows networking, refer to thePC Networking Tutorial on theNETGEAR 54 Mbps WirelessPC Card WG511v2 ResourceCD and the Help informationprovided in the Windows systemyou are using.For assistance with setting upprinters in Windows, refer to theHelp and Support informationthat comes with the version ofthe Windows operating systemsyou are using.Introduction 1-7