Installation and Operating Instructions - Altronic Inc.

REGISTERS DESCRIPTION DATA TYPE CHANNEL40263 DECIMAL POINT / SENSOR CONFIG UNSIGNED INT 740264 DECIMAL POINT / SENSOR CONFIG UNSIGNED INT 840265 DECIMAL POINT / SENSOR CONFIG UNSIGNED INT 940266 DECIMAL POINT / SENSOR CONFIG UNSIGNED INT 1040267 DECIMAL POINT / SENSOR CONFIG UNSIGNED INT 1140268 DECIMAL POINT / SENSOR CONFIG UNSIGNED INT 1240269 DECIMAL POINT / SENSOR CONFIG UNSIGNED INT 1340270 DECIMAL POINT / SENSOR CONFIG UNSIGNED INT 1440271 DECIMAL POINT / SENSOR CONFIG UNSIGNED INT 1540272 DECIMAL POINT / SENSOR CONFIG UNSIGNED INT 1640273 DECIMAL POINT / SENSOR CONFIG UNSIGNED INT 1740274 DECIMAL POINT / SENSOR CONFIG UNSIGNED INT 1840275 DECIMAL POINT / SENSOR CONFIG UNSIGNED INT 1940276 DECIMAL POINT / SENSOR CONFIG UNSIGNED INT 2040277 DECIMAL POINT / SENSOR CONFIG UNSIGNED INT 2140278 DECIMAL POINT / SENSOR CONFIG UNSIGNED INT 2240279 DECIMAL POINT / SENSOR CONFIG UNSIGNED INT 2340280 DECIMAL POINT / SENSOR CONFIG UNSIGNED INT 2440281 DECIMAL POINT / SENSOR CONFIG UNSIGNED INT 2540282 DECIMAL POINT / SENSOR CONFIG UNSIGNED INT 2640283 DECIMAL POINT / SENSOR CONFIG UNSIGNED INT 2740284 DECIMAL POINT / SENSOR CONFIG UNSIGNED INT 2840285 DECIMAL POINT / SENSOR CONFIG UNSIGNED INT 2940286 DECIMAL POINT / SENSOR CONFIG UNSIGNED INT 3040769 DIGITAL OUTPUTS UNSIGNED INT, LSB40770 ANALOG OUTPUT #1 UNSIGNED INT 0-409540771 ANALOG OUTPUT #2 UNSIGNED INT 0-409540772 MODBUS WRITE PROTECT UNSIGNED IT 5300H = WRITE ENABLENOTE: Modbus write commands will NOT be accepted unless the 40772 register contains 5300h. This may be used toprotect against accidental writes to critical memory locations.MTB IOI 4-12 All rights reserved © ALTRONIC, LLC 2012 13