Installation and Operating Instructions - Altronic Inc.

More documents

Recommendations

Info

9.0 TRANSDUCER TABLEWhen displaying/modifying, it is important to the set the Modbus registers forthe proper data type. For example, if the displayed value is -125 for a signedinteger, it will display as 65410 as an unsigned integer.TRANSDUCER SLOPE, X OFFSET, B MIN VALUE MAX VALUE D.P. CONFIG COMMENTS0-50 213 5464 -125 625 10-100 213 5464 -250 1250 10-300 213 5464 -750 375 10-500 213 5464 -1250 6250 00-1000 213 5464 -250 1250 00-2000 213 5464 -500 2500 00-5000 213 5464 -1250 6250 0VOLTMETER 255 0 0 500 20-100.0%, 4-20mA 267 -76 -250 1250 1DEG1 432 0 0 300 0Deg2 300 0 -143 675 256J-TC 271 500 -76 1382 512K-TC 271 500 -76 1472 768DIG INPUT N/O 213 5464 -125 625 1025 0 = OK, 1 = FAULTDIG INPUT N/C 213 5464 -125 625 1281 0 = OK, 1 = FAULTTo display the thermocouples in Celsius, replace the ‘-76’ with ‘-60’ for bothand replace 1382 and 1472 with ‘750’ and ‘800’ respectively. These rangesshould never be changed due to linearization tables.MTB IOI 4-12 All rights reserved © ALTRONIC, LLC 2012 14
DRAWINGS SECTION:FIGURE 1 — MODBUS TERMINAL BOARDFIGURE 2 — WIRING DIAGRAM — SENSOR AND TRANSDUCER INPUTS/POWERFIGURE 3 — WIRING DIAGRAM — CURRENT LOOP OUTPUTSFIGURE 4 — WIRING DIAGRAM — DIGITAL OUTPUT SWITCHESMTB IOI 4-12 All rights reserved © ALTRONIC, LLC 2012 15
Page 1 and 2: Installation and Operating Instruct
Page 3 and 4: 2.6 N/O and N/C INPUTSThe inputs ca
Page 5 and 6: 4.3 THERMOCOUPLES AND THERMOCOUPLE
Page 7 and 8: VOLTAGE VS PRESSURE62.550PRESSURE37
Page 9 and 10: REGISTERS DESCRIPTION DATA TYPE CHA
Page 11 and 12: REGISTERS DESCRIPTION DATA TYPE CHA
Page 13: REGISTERS DESCRIPTION DATA TYPE CHA
Page 17 and 18: FIGURE 2 — WIRING DIAGRAM — SEN
Page 19: FIGURE 4 — WIRING DIAGRAM — DIG

Installation and Operating Instructions - Altronic Inc.

Create successful ePaper yourself

Delete template?

Save as template?