applied fracture mechanics

Evaluating the Integrity of Pressure Pipelines by Fracture Mechanics 3097. ReferencesAinsworth, R. A. & O´Dowd, N. P. (1995). Constraint in the Failure Assessment DiagramApproach for Fracture Assessment. Transactions ASME – Journal of Pressure VesselTechnology, Vol.117, pp. 260-267ASTM Standard E 1820-01 (2001). Standard Test Method for Measurement of Fracture Toughness,2001Erdogan, F. & Kibler, J. J. (1969). Cylindrical and Spherical Shells with Cracks. InternationalJournal of Fracture Mechanics, Vol.5, No.3, pp. 229-237Erdogan, F.; Delale, F. & Owczarek, J. A. (1977). Crack Propagation and Arrest inPressurized Containers. Journal of Pressure Vessel Technology, Vol.99, (February 1977), pp.90-99Evans, J. T., Kotsikos, G. & Robey, R. F. (1995). A method for Fracture Toughness TestingCylinder Material. Engineering Fracture Mechanics, Vol.50, No.2, pp. 295-300Folias, E. S. (1969). On the Effect of Initial Curvature on Cracked Flat Sheets. InternationalJournal of Fracture Mechanics, Vol.5, No.4, pp. 327-346Folias, E. S. (1970). On the Theory of Fracture of Curved Sheets. Engineering FractureMechanics, Vol.2, No.2, pp. 151-164Gajdoš, Ľ. & Srnec, M. (1994). An Approximate Method for J Integral Determination. ActaTechnica CSAV, Vol.39, No.2, pp. 151-171Gajdoš Ľubomír et al. (2004). Structural Integrity of Pressure Pipelines. Transgas, 80-86616-03-7, Prague, Czech RepublicGajdoš, Ľ. & Šperl, M. (2011). Application of a Fracture-Mechanics Approach to GasPipelines. Proceedings of World Academy of Science, Engineering and Technology. Vol.73,January 2011, pp. 480 - 487Gajdoš, Ľ., Šperl, M. & Siegl, J. (2011). Apparent Fracture Toughness of Low-Carbon SteelCSN 411353 as Related to Stress Corrosion Cracks. Materials and Design, Vol.32, No.8-9,pp. 4348-4353Gajdoš, Ľ. & Šperl, M. (2012). The Effect of Straightening a Curved Body on Its FractureProperties (in Czech). In: Proceedings of the 21st Colloquium “Safety and Reliability of GasPipelines”, Prague, 2012Hutchinson, J. W. (1968). Singular Behaviour at the End of a Tensile Crack Tip in aHardening Material. Journal of the Mechanics and Physics of Solids, Vol.16, pp. 13-31Milne, I.; Ainsworth, R. A.; Dowling, A. R. & Stewart, A. T. (1986). Assessment of the Integrityof Structures Containing Defects. CEGB Report No. R/H/R6 – Rev.3, Central ElectricityGenerating Board, London, U.K., (1986)NACE Standard TM0177 (2005). Laboratory Testing of Metals for Resistance to Sulfide StressCracking and Stress Corrosion Cracking in H2S Environments. Item No. 21212, 2005Newman, J. C. (1973). Fracture Analysis of Surface and Through-Cracked Sheets and Plates.Engineering Fracture Mechanics, Vol.5, No.3, pp. 667-689O´Dowd, N. P. & Shih, C. F. (1991). Family of Crack-Tip Fields Characterized by a TriaxialityParameter – I. Structure of Fields. Journal of the Mechanics and Physics of Solids, Vol.39,pp. 898-1015