User's Manual - from Measurement Computing

ConnectionsDaqBoard/2002 Block Diagram**The DaqBoard/2002c Block Diagram is the same, with exception that the /2002c board uses acompact-PCI Bus instead of a standard PCI bus.InstallationReference Note: For the DaqBoard/2002 and compact-PCI DaqBoard/2002c installationprocedure, refer to either the DaqBoard/1000 and /2000 Series Installation Guide or to theDaqBoard/2000c Series Installation Guide, as applicable. The guides are included at thebeginning of this manual.I/O ConnectorAll input and output signals are available at the board’s 100-pin P4 connector. A 3-foot, 100-conductorribbon cable, part number CA-195, mates with connector P4.Reference Note: There are several P4-connector board options available for connecting the100 pins of P4 to typical DB37 connectors (P1, P2, and P3). In addition to being brieflydiscussed in chapter 3 of this manual, these options, referred to as DBK200 Series, aredetailed in the DBK Cards and Modules User’s Manual (p/n 457-0905).1-16 Daq Systems and Device Overviews 929095 DaqBoard/1000 and /2000 Series User’s Manual