SP-DR-IR1-xDFM - Source Photonics

PreliminarySP-DR-IR1-xDFMFeatures• Dual rate 155M/622Mbps• Up to 15km transmission on SMF• 1310nm FP laser and PIN photodetector• Digital diagnostic monitor interface compatiblewith SFF-8472• SFP MSA package with duplex LC connector• +3.3V single power supply• Power consumption less than 1W• Operating case temperatureStandard temp: -5~+70°C;Industrial temp: -40~+85°C• RoHS compliantRegulatory ComplianceTable 1 - Regulatory ComplianceElectrostatic DischargeMIL-STD-883E(ESD) to the Electrical PinsMethod 3015.7Class 2(>2000 V)Electrostatic Discharge (ESD) to the IEC 61000-4-2Duplex LC ReceptacleGR-1089-CORECompatible with standardsFCC Part 15 Class BElectromagneticEN55022 Class B (CISPR 22B)Interference (EMI)VCCI Class BCompatible with standardsImmunity IEC 61000-4-3 Compatible with standardsLaser Eye SafetyFDA 21CFR 1040.10 and 1040.11 Compatible with Class I laserEN60950, EN (IEC) 60825-1,2 product.RoHS2002/95/EC 4.1&4.22005/747/ECCompliant with RoHS 6Absolute Maximum RatingsTable 2 - Absolute Maximum RatingsParameter Symbol Min. Typical Max. Unit NotesStorage Temperature T S -40 - +85 °CSupply Voltage V CC -0.5 - +3.6 VOperating Relative Humidity RH +5 - +95 %DS-5733 Rev 0.1 2009-08-23

PreliminarySP-DR-IR1-xDFMRecommended Interface CircuitHost BoardVcc (+3.3V)2×4.7K to 10KTX DisableSFP ModuleVccT10KTX FaultSerDat Out +Z=50TD +ProtocolICSERDESICSerDat Out -SerDat In +Z=50Z=50TD -RD +LaserdriverSerDat In -Z=50RD -AmplifierLOSVcc (+3.3V)3×4.7K to 10KMOD-DEF2MOD-DEF1MOD-DEF0EEPROMRGNDFigure 2, Recommended Interface CircuitPin DefinitionsFigure 3 below shows the pin numbering of SFP electrical interface. The pin functions are described inTable 6 with some accompanying notes.TOP VIEWOF BOARDPin 20Pin 11Pin 10BOTTOM VIEWOF BOARDPin 1Figure 3, Pin ViewTable 6 - Pin Function DefinitionsPin No. Name Function Plug Seq. Notes1 VeeT Transmitter Ground 12 TX Fault Transmitter Fault Indication 3 Note 1DS-5733 Rev 0.1 2009-08-23

PreliminarySP-DR-IR1-xDFMMechanical DiagramUnits in mm(inch)Figure 5, Mechanical Design Diagram of the SFPOrder InformationTable 9– Order InformationPart No. Application Data Rate Laser Source Fiber TypeSP-DR-IR1-CDFM(c-temp)SP-DR-IR1-IDFM(i-temp)OC-3 OC-12 IR1 dualrateOC-3 OC-12 IR1 dualrate155M/622M 1310nm FP SMF155M/622M 1310nm FP SMFWarningsHandling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). Astatic free environment is highly recommended. Follow guidelines according to proper ESD procedures.Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure todirect or indirect radiation.Legal NoticeDS-5733 Rev 0.1 2009-08-23

PreliminarySP-DR-IR1-xDFMIMPORTANT NOTICE!All information contained in this document is subject to change without notice, at Source Photonics’s sole andabsolute discretion. Source Photonics warrants performance of its products to current specifications only inaccordance with the company’s standard one-year warranty; however, specifications designated as“preliminary” are given to describe components only, and Source Photonics expressly disclaims any and allwarranties for said products, including express, implied, and statutory warranties, warranties ofmerchantability, fi tness for a particular purpose, and non-infringement of proprietary rights. Please refer to thecompany’s Terms and Conditions of Sale for further warranty information.Source Photonics assumes no liability for applications assistance, customer product design, softwareperformance, or infringement of patents, services, or intellectual property described herein. No license, eitherexpress or implied, is granted under any patent right, copyright, or intellectual property right, and SourcePhotonics makes no representations or warranties that the product(s) described herein are free from patent,copyright, or intellectual property rights. Products described in this document are NOT intended for use inimplantation or other life support applications where malfunction may result in injury or death to persons.Source Photonics customers using or selling products for use in such applications do so at their own risk andagree to fully defend and indemnify Source Photonics for any damages resulting from such use or sale.THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS” BASIS. Customeragrees that Source Photonics is not liable for any actual, consequential, exemplary, or other damages arisingdirectly or indirectly from any use of the information contained in this document. Customer must contactSource Photonics to obtain the latest version of this publication to verify, before placing any order, that theinformation contained herein is current.ContactU.S.A. Headquarters20550 Nordhoff StreetChatsworth, CA 91311USATel: +1-818-773-9044Fax: +1-818-773-0261ChinaBuilding #2&5, West ExportProcessing ZoneNo. 8 Kexin Road, Hi-Tech ZoneChengdu, 611731, ChinaTel: +86-28-8795-8788Fax: +86-28-8795-8789Taiwan9F, No 81, Shui Lee Rd.Hsinchu, Taiwan, R.O.C.Tel: +886-3-5169222Fax: +886-3-5169213Copyright Source Photonics, Inc. 2007~2008All rights reservedDS-5733 Rev 0.1 2009-08-23