P/N: B-15/13-155(C)-T(3)-Sxx3(4)x(-G5) - Source Photonics

P/N: B-15/13-155(C)-T(3)-Sxx3(4)x(-G5)155 Mbps Bi-directional Receptacle Single Fiber TransceiverFeatures• Diplexer Single Mode Single Fiber 1x9 SC/FC/STReceptacle Connector• Wavelength Tx 1530 nm/Rx 1310 nm• SONET OC-3 SDH STM-1 Compliant• Single +5V/+3.3V Power Supply• PECL/LVPECL Differential Inputs and Output• [B-15/13-155-T(3)-Sxx3(4)]• TTL/LVTTL Differential Inputs and Output• [B-15/13-155C-T(3)-Sxx3(4)]• Wave Solderable and Aqueous Washable• LED Multisourced 1x9 Transceiver Interchangeable• Class 1 Laser Int. Safety Standard IEC 825 Compliant• Uncooled Laser diode with MQW structure• Complies with Telcordia (Bellcore) GR-468-CORE• RoHS compliance availableTable 1 – Absolute Maximum RatingParameter Symbol Min. Typical Max. Unit NotesPower Supply Voltage Vcc 0 - 6 VPower Supply Voltage Vcc 0 - 3.6 VOutput Current I out - - 30 mASoldering Temperature - - - 260 ºC 1Storage Temperature Tstg -40 - 85 ºCNote 1: 10 senconds on leads onlyTable 2 – Recommended Operating ConditionParameter Symbol Min. Typical Max. Unit NotesPower Supply Voltage Vcc 4.75 5 5.25 V 2Power Supply Voltage Vcc 3.1 3.3 3.5 V 2Operating Temperature (Case) Topr 0 - 70 ºCOperating Temperature (Case) Topr -40 - 85 ºCData Rate DR - 155 - MbpsNote 2: please refer to ordering information- 1 -DS-5845 Rev 0.0 2010-02-11

P/N: B-15/13-155(C)-T(3)-Sxx3(4)x(-G5)155 Mbps Bi-directional Receptacle Single Fiber TransceiverTable 3 – Transmitter Specifications (Optical)Parameter Symbol Min. Typical Max. Unit NotesOptical Transmit Power P o -14 - -8 dBm 3Optical Transmit Power P o -8 - -3 dBm 4Output Center Wavelength λ c 1480 1530 1580 nmOutput Spectrum Width Δλ - - 3 nm 5Extinction Ratio ER 8.2 - - dBOutput EyeCompliant with ITU-T recommendation G.957/STM-1Optical Rise/Fall Time t r /t f - - 2 ns 6Optical Isolation - 30 - - dB 7Relative Intensity Noise RIN - - -116 dB/HzTotal Jitter T J - - 1.2 ns 8Note 3: Output power is coupled into a 9/125 µm single mode fiber, B-15/13-155(C)-T(3)-Sxx3Note 4: Output power is coupled into a 9/125 µm single mode fiber, B-15/13-155(C)-T(3)-Sxx4Note 5: RMS (σ)Note 6: 10% to 90% ValuesNote 7: Tx: Isolation potential between 1530-1310nm at least 30dBNote 8: Measured with 2 23 -1 PRBS with 72 ones and 72 zeros.Table 4 – Transmitter Specifications (Electrical)Parameter Symbol Min. Typical Max. Unit NotesPower Supply Current I CC - - 140 mA 9Data Input Current-Low I IL -350 - - μAData Input Current-High I IH - - 350 μADifferential Input Voltage V IH -V IL 300 - - mVData Input Voltage-Low V IL -V CC -2.0 - -1.58 mVData Input Voltage-High V IH -V CC -1.1 - -0.74 mV 10Note 9: Maximum current is specified at Vcc=Maximum @ maximum temperatureNote 10: These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs- 2 -DS-5845 Rev 0.0 2010-02-11

P/N: B-15/13-155(C)-T(3)-Sxx3(4)x(-G5)155 Mbps Bi-directional Receptacle Single Fiber TransceiverTable 5 – Receiver Specifications (Optical)Parameter Symbol Min. Typical Max. Unit NotesSensitivity - - - -33 dBm 11Maximum Input Power P in -3 - - dBmSignal Detect-Asserted Pa - - -33 dBm 12Signal Detect-Deasserted Pd -45 - - dBmSignal Detect-Hysteresis - 1.0 - 4.0 dBCross Talk - - - -33 nmWavelength of Operation 1260 - 1360 nmNote 11: Measured with 2 23 -1 PRBS, BER = 10 -10Note 12: Measured on transition: low to high, The SD level should be deasserted when fiber disconnectedTable 6 – Receiver Specifications (Electrical)Parameter Symbol Min. Typical Max. Unit NotesPower Supply Current I CC - - 100 mA 13Data Output Voltage-Low V OL -V CC -2.0 - -1.58 VData Output Voltage-High V OH -V CC -1.1 - -0.74 V14Signal Detect Output Voltage-Low V SDL -V CC -2.0 - -1.58 VSignal Detect Output Voltage-High V SDH -V CC -1.1 - -0.74 V15Signal Detect Output Voltage-Low V SDL - - 0.5 VSignal Detect Output Voltage-High V SDH 2.0 - - V16Note 13: The current excludes the output load currentNote 14: These outputs are compatible with 10K, 10KH and 100KECL and LVPECL outputs.Note 15: B-15/13-155-T(3)-Sxx3(4)Note 16: B-15/13-155C-T(3)-Sxx3(4)- 3 -DS-5845 Rev 0.0 2010-02-11

P/N: B-15/13-155(C)-T(3)-Sxx3(4)x(-G5)155 Mbps Bi-directional Receptacle Single Fiber TransceiverConnection DiagramTable 7 – Pin DefinitionsPin Unit Notes1 RxGND Directly connect this pin to the receiver ground plane2 RD+ See recommended circuit schematic3 RD- See recommended circuit schematic4 SD Active high on this indicates a received optical signal5 RxVcc DC power for the receiver section6 TxVcc DC power for the transmitter section7 TD- See recommended circuit schematic8 TD+ See recommended circuit schematic9 TxGND Directly connect this pin to the transmitter ground plane- 4 -DS-5845 Rev 0.0 2010-02-11

P/N: B-15/13-155(C)-T(3)-Sxx3(4)x(-G5)155 Mbps Bi-directional Receptacle Single Fiber TransceiverRecommended Circuit SchematicB-15/13-155-T(3)-Sxx3(4)x(-G5)Tx VccRx VccC5R1R39 8 7 654321R9R5R7C6TD +RD +TD -RD -Tx VccSDR2R4Notes +3.3V:R1=R3=R5=R7=R9=130ΩR2=R4=R6=R8=R10=82ΩC1=C2=C3=C5=C6=0.1μFC4=10μFL1=L2=1μHNo internalconnectionRx VccTransceiverTop viewNotes +5V:R1=R3=R5=R7=R9=82ΩR2=R4=R6=R8=R10=130ΩC1=C2=C3=C5=C6=0.1μFC4=10μFL1=L2=1μHNo internalconnectionVccR10 R6 R8L1C3 C1L2C4 C2Rx VccTx VccB-15/13-155C-T(3)-Sxx3(4)x(-G5)Tx VccRx VccC5R1R39 8 7 654321R5R7C6TD +RD +TD -RD -Tx VccSDR2R4Notes +3.3V:R1=R3=R5=R7=130ΩR2=R4=R6=R8=82ΩC1=C2=C3=C5=C6=0.1μFC4=10μFL1=L2=1μHNo internalconnectionRx VccTransceiverTop viewNotes +5V:R1=R3=R5=R7=82ΩR2=R4=R6=R8=130ΩC1=C2=C3=C5=C6=0.1μFC4=10μFL1=L2=1μHNo internalconnectionVccR6 R8L1C3 C1L2C4 C2Rx VccTx Vcc- 5 -DS-5845 Rev 0.0 2010-02-11

P/N: B-15/13-155(C)-T(3)-Sxx3(4)x(-G5)155 Mbps Bi-directional Receptacle Single Fiber TransceiverPackage DiagramB-15/13-155(C)-T(3)-SSC3(4)x(-G5)Units in mmTop ViewFront ViewSide ViewRear ViewB-15/13-155(C)-T(3)-SST3(4)x(-G5)3/8-32UNEF-2ASide ViewRear View- 6 -DS-5845 Rev 0.0 2010-02-11

P/N: B-15/13-155(C)-T(3)-Sxx3(4)x(-G5)155 Mbps Bi-directional Receptacle Single Fiber TransceiverPackage DiagramB-15/13-155(C)-T(3)-SFC3(4)x(-G5)Top ViewFront ViewUnits in mmSide ViewRear View- 7 -DS-5845 Rev 0.0 2010-02-11

P/N: B-15/13-155(C)-T(3)-Sxx3(4)x(-G5)155 Mbps Bi-directional Receptacle Single Fiber TransceiverOrder InformationTable 8 – Order InformationPart No.B-15/13-155(C)-T-SSC3B-15/13-155(C)-T-SST3B-15/13-155(C)-T-SFC3B-15/13-155(C)-T3-SSC3B-15/13-155(C)-T3-SST3B-15/13-155(C)-T3-SFC3B-15/13-155(C)-T-SSC3AB-15/13-155(C)-T-SST3AB-15/13-155(C)-T-SFC3AB-15/13-155(C)-T3-SSC3AB-15/13-155(C)-T3-SST3AB-15/13-155(C)-T3-SFC3AB-15/13-155(C)-T-SSC4B-15/13-155(C)-T-SST4B-15/13-155(C)-T-SFC4B-15/13-155(C)-T3-SSC4B-15/13-155(C)-T3-SST4B-15/13-155(C)-T3-SFC4B-15/13-155(C)-T-SSC4AB-15/13-155(C)-T-SST4AB-15/13-155(C)-T-SFC4AB-15/13-155(C)-T3-SSC4AB-15/13-155(C)-T3-SST4AB-15/13-155(C)-T3-SFC4APart No.B-15/13-155(C)-T-SSC3-G5B-15/13-155(C)-T-SST3-G5B-15/13-155(C)-T-SFC3-G5B-15/13-155(C)-T3-SSC3-G5B-15/13-155(C)-T3-SST3-G5B-15/13-155(C)-T3-SFC3-G5B-15/13-155(C)-T-SSC3A-G5B-15/13-155(C)-T-SST3A-G5B-15/13-155(C)-T-SFC3A-G5B-15/13-155(C)-T3-SSC3A-G5B-15/13-155(C)-T3-SST3A-G5B-15/13-155(C)-T3-SFC3A-G5B-15/13-155(C)-T-SSC4-G5B-15/13-155(C)-T-SST4-G5B-15/13-155(C)-T-SFC4-G5B-15/13-155(C)-T3-SSC4-G5B-15/13-155(C)-T3-SST4-G5B-15/13-155(C)-T3-SFC4-G5B-15/13-155(C)-T-SSC4A-G5B-15/13-155(C)-T-SST4A-G5B-15/13-155(C)-T-SFC4A-G5B-15/13-155(C)-T3-SSC4A-G5B-15/13-155(C)-T3-SST4A-G5B-15/13-155(C)-T3-SFC4A-G5- 8 -DS-5845 Rev 0.0 2010-02-11

P/N: B-15/13-155(C)-T(3)-Sxx3(4)x(-G5)155 Mbps Bi-directional Receptacle Single Fiber TransceiverPart Numbering Definition:B - 15/13 - 155(C) - T(3) - S xx Tx Power Temperature and Package - RoHS● Wavelength :15/13 = Tx Wavelength = 1530nmRx Wavelength = 1310nm● Communication Protocol(155Mbps)155 = PECL Signal Detection Optupt155C = TTL Signal Detection Optupt● T = +5 V TransceiverT3 = +3.3V Transceiver● Single mode fiber● Connector optionsSC/ST/FC● Tx power3 = -14 to -8 dBm4 = -8 to -3 dBm● Temperature range and packageBlank = commercial temperature(0 to 70 o C)A = industrial temperature(-40 to 85 o C)● RoHS compliance availableBlank = RoHS non-compliant productG5 = RoHS 5/6-compliant product (lead exemption)- 9 -DS-5845 Rev 0.0 2010-02-11

P/N: B-15/13-155(C)-T(3)-Sxx3(4)x(-G5)155 Mbps Bi-directional Receptacle Single Fiber TransceiverWarningsHandling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A staticfree environment is highly recommended. Follow guidelines according to proper ESD procedures.Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct orindirect radiation.Legal NoticeIMPORTANT NOTICE!All information contained in this document is subject to change without notice, at Source Photonics’ sole andabsolute discretion. Source Photonics warrants performance of its products to current specifications only inaccordance with the company’s standard one-year warranty; however, specifications designated as “preliminary”are given to describe components only, and Source Photonics expressly disclaims any and all warranties for saidproducts, including express, implied, and statutory warranties, warranties of merchantability, fitness for a particularpurpose, and non-infringement of proprietary rights. Please refer to the company’s Terms and Conditions of Sale forfurther warranty information.Source Photonics assumes no liability for applications assistance, customer product design, software performance,or infringement of patents, services, or intellectual property described herein. No license, either express or implied,is granted under any patent right, copyright, or intellectual property right, and Source Photonics makes norepresentations or warranties that the product(s) described herein are free from patent, copyright, or intellectualproperty rights. Products described in this document are NOT intended for use in implantation or other life supportapplications where malfunction may result in injury or death to persons. Source Photonics customers using orselling products for use in such applications do so at their own risk and agree to fully defend and indemnify SourcePhotonics for any damages resulting from such use or sale.THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS” BASIS. Customer agreesthat Source Photonics is not liable for any actual, consequential, exemplary, or other damages arising directly orindirectly from any use of the information contained in this document. Customer must contact Source Photonics toobtain the latest version of this publication to verify, before placing any order, that the information contained herein iscurrent.ContactU.S.A. Headquarters20550 Nordhoff StreetChatsworth, CA 91311USATel: +1-818-773-9044Fax: +1-818-773-0261sales@sourcephotonics.comChinaBuilding #2&5, West Export Processing ZoneNo. 8 Kexin Road, Hi-Tech ZoneChengdu, 611731, ChinaTel: +86-28-8795-8788Fax: +86-28-8795-8789sales@sourcephotonics.com.cnTaiwan9F, No 81, Shui Lee Rd.Hsinchu, 300, TaiwanR.O.C.Tel: +886-3-5169222Fax: +886-3-5169213sales@sourcephotonics.com.tw© Copyright Source Photonics, Inc. 2007~2008All rights reserved- 10 -DS-5845 Rev 0.0 2010-02-11