communications interface loop link 5905a - Omni Instruments

NORMAL OPERATION:Operators are only allowed to adjust and operate modules that are safely fixed inpanels, etc., thus avoiding the danger of personal injury and damage. This meansthere is no electrical shock hazard, and the module is easily accessible.CLEANING:When disconnected, the module may be cleaned with a cloth moistened withdistilled water or ethyl alcohol.LIABILITY:To the extent that the instructions in this manual are not strictly observed, thecustomer cannot advance a demand against PR electronics A/S that wouldotherwise exist according to the concluded sales agreement.DECLARATION OF CONFORMITYAs manufacturerPR electronics A/SLerbakken 10DK-8410 Røndehereby declares that the following product:Type: 5905AName: Loop Linkis in conformity with the following directives and standards:EMC directive 2004/108/EC and later amendmentsEN 61326This declaration is issued in compliance with article 10, subclause 1 of the EMCdirective. For specification of the acceptable EMC performance level, refer tothe electrical specifications for the module.Rønde, 3 June 2005Peter RasmussenManufacturer’s signature1415