communications interface loop link 5905a - Omni Instruments

INSTALLATION FOR WINDOWS ® 95/98/-NTTHE SOFTWARE ON THE CD-ROMThe PReset software is designed for a Windows ® 95/98/-NT environment andis used for configuring PC-programmable PR modules. If the module cannot beprogrammed by the Windows ® 95/98/-NT software, the PReset DOS versionautomatically starts. This version is available on the CD-ROM in the PReset.DOSfolder. All new products of PReset will be designed for the Windows ® 95/98/-NTenvironments.SYSTEM REQUIREMENTSWindows ® 95/98/-NT environment with the following recommendations:Memory . . . . . . . . . . 16 MBResolution . . . . . . . . 800 x 600Harddisk . . . . . . . . . . 12 MBINSTALLATIONPReset will be installed on your harddisk, and the registry will be updated withthe necessary information on the program. A PReset icon will automatically beplaced on the desktop. The earlier DOS version will automatically be installed inthe C:\PReset folder.1. Insert the CD-ROM in the CD-ROM drive and the dialogue AutoRunis automatically shown.2. Click Setup. When the installations program has been started, onscreenguidelines will guide you through the rest of the installation.3. If AutoRun is disabled in Windows ® 95/98/-NT, click the Startbutton, select [Run] and type Install.exe.INSTALLATION FOR DOS AND WINDOWS ®3.XXSYSTEM REQUIREMENTSThe PReset 5000 software is based on Turbo Vision, which will operate on mostIBM-compatible PCs with the following minimum configuration:Memory: Min. 512 kB accessible memoryDisplay: CGA, HCG, EGA, or VGAOperating system: DOS 3.1 or later versionsPrinter (option): Epson or IBM compatible ASCII prin terMouse (option): Microsoft compatible mouse (MOUSE.COM)INSTALLATION*******************************************************************************************DOS*******************************************************************************************Default installation in C:\PRESET1.Insert the CD-ROM in the CD-ROM drive2.Change to the CD-ROM drive:3.Type: CD\PRESET.DOS < Enter>4.Type: install < Enter>Run PReset:1. Type: C:2. Type: CD\Preset3. Type: PresetA batch file can be created to start PReset.1819