2011 Proto Rail Paintball Gun Service Manual - Wolfpack Paintball ...

RAIL BOLTASSEMBLY AND MAINTENANCEWhen the RAIL is fired the solenoid is actuatedand the air inside the Can is exhausted out. Theforce created by the air inside the supply chambercauses the bolt to start moving forward. Once thebolt has moved about half way forward, the tail ofthe bolt closes the input into the supply chamber.Once the Bolt reaches the forward point, the valveof the RAIL Bolt is opened and air inside thesupply chamber goes through the Bolt and firesthe paintball. After this the solenoid is deactivatedand gas is supplied through thesolenoid back into the Can. This causes the Boltto return to the back position and the supplychamber to be re-charged.When servicing your marker:• Make sure your hopper is removed from the marker.• Make sure there are no paintballs in the breech of the marker.• Always remove the air supply and relieve all gas pressure in the markerbefore disassembly.• When using the marker in temperatures below 50° Fahrenheit it may benecessary to lube the RAIL bolt more frequently.W W W . P R O T O P A I N T B A L L . C O M15