2011 Proto Rail Paintball Gun Service Manual - Wolfpack Paintball ...

QUICK REFERENCEUSING YOUR MARKERSTEP 4. ATTACHING GAS SOURCEScrew on a preset air system into the airport located on the bottom of the gripframe.Be sure the air system is screwed in all the way into the Airport. If there is a leakfrom the airport when screwing in the air system, replace the o-ring on the presetregulator.STEP 5. TURNING ON THE RAIL AND CHECKING THE VELOCITYA. Make sure you and everybody around you is wearing ASTM / CE approvedpaintball masks.B. Press and hold the top button located behind the grip frame until the RAILturns on. WARNING, THE RAIL IS LIVE. MAKE SURE BARREL PLUG IS IN PLACEAND DO NOT POINT THE RAIL AT ANYTHING YOU DON’T INTEND TO SHOOT.C. Fill up the loader with .68 caliber paintballs.D. Shoot the RAIL over a chronograph to check the velocity. If adjustment isneeded, adjust the velocity by turning the Hyper3 velocity adjustment screw witha 3/16” allen key. In (clockwise) will reduce the velocity and out (counter clockwise)will increase the velocity. After each adjustment it takes a few shots before thechange can be seen on the chronograph. Never adjust the RAIL to shoot fasterthan 300fps or what the field rules / local laws permit.W W W . P R O T O P A I N T B A L L . C O M5