DIR-826L A1 FW1.00 External Spec 1.00 - D-Link

2.1.3.1 PowerIndicator Color Status Blinking Speed DescriptionInternet1. During power on process.2. Device is undergoing factory reset process.Orange Solid -(The process should start as soon as factoryreset to default button exceeds 5 seconds/”Reset Factory Defaults” button on UI ispushed)3. Device is undergoing reboot process. (Theprocess should start as soon as thehardware switch button/”Reboot TheDevice” button on UI is pushed)4. Device system is crashed.Green Solid - Device is on and system is healthy.Orange Blinking Slow Device is under recovery mode.Green Blinking Slow Device is processing WPS.- Off - Device is power off.Green Solid -Device connect to Internet successfully. Internetport is receiving/transmitting traffic.Green Blinking HighInternet port is physically attached to anEthernet cable.1. xDSL is present but the IP or PPP sessionis dropped due to an idle timeout.2. Internet port is physically attached to anEthernet cable, the Internet type isproperly configured in the router and theISP service is in operation BUT with thefollowing conditions, the “Internet” LEDblinks in Orange in “low Speed“: (Notconnected to the Internet)Orange Blinking Slowi. Internet type is configured with“Connect on Demand” option butuser has not trigger the connection.ii. Internet type is configured with“Manual” option but user has nottrigger the connection.iii. Internet type is configured with“Scheduling” option but thecondition is outside the definedschedule.1. The xDSL is present but the IP or PPPsession is dropped not due to an idleOrange Solid -timeout.2. Device is properly configured but the ISPservice is down (No DHCP response, noPPP response/authentication failed).1. Internet port is not connected to an Ethernet- Off -cable.2. Device is being factory reset, LED will turnsoff in first 2 seconds.D-Link Corporation confidential5