DIR-826L A1 FW1.00 External Spec 1.00 - D-Link

2.1.4 IEEE 802.3 SectionFeature2.1.4.1 One 10/100/1000BASE-TGigabit EthernetWAN port2.1.4.2 Four 10/100/1000BASE-TGigabit EthernetLAN port2.1.5 IEEE 802.11a (5G) SectionDetailed Description• One 10/100/1000 Mbps Gigabit Ethernet port• Complies IEEE 802.3ab specification• Complies IEEE 802.3u specification• Support IEEE 802.3x Flow Control• Support Auto Negotiation• Support Auto MDI/MDIX• Four 10/100/1000 Mbps Gigabit Ethernet port• Complies IEEE 802.3ab specification• Complies IEEE 802.3u specification• Support IEEE 802.3x Flow Control• Support Auto Negotiation• Support Auto MDI/MDIXFeatureDetailed Description2.1.5.1 Standard • IEEE 802.11a2.1.5.2 Radio and Modulation • BPSK, QPSK, 16QAM, 64QAM with OFDMType2.1.5.3 Operating Frequency • 5180MHz~5320MHz, 5745MHz~5825MHz2.1.5.4 Channel Numbers • CH36~CH64/CH00~CH1652.1.5.5 Data Rate • 6,9,12,18,24,36,48,54Mbps2.1.5.6 Transmitter Output Power Typical RF Output Power at each RF chain, Data Rate and atroom Temp. 25degree C ( tolerance ± 1.5dB )• CH36~CH6414dBm at 6~54 Mbps for US20dBm at 6~54 Mbps for EU20dBm at 6~54 Mbps for AU• CH100~CH16524dBm at 6~54 Mbps for US24dBm at 6~54 Mbps for EU24dBm at 6~54 Mbps for AU2.1.5.7 Effective IsotropicRadiated Power• CH36~CH6414dBm at 6~54 Mbps for US20dBm at 6~54 Mbps for EU20dBm at 6~54 Mbps for AU• CH100~CH16524dBm at 6~54 Mbps for US24dBm at 6~54 Mbps for EU24dBm at 6~54 Mbps for AU2.1.5.8 Receiver Sensitivity Typical Sensitivity at Which Frame (1000-byte PDUs) Error Rate =10%• –82dBm at 6Mbps• –81dBm at 9Mbps• –79dBm at 12Mbps• –77dBm at 18Mbps• –74dBm at 24Mbps• –70dBm at 36Mbps• –66dBm at 48Mbps• –65dBm at 54MbpsD-Link Corporation confidential6