SAFETY EQUIPMENT CATALOGUE - Eoss.com

RegulatorsGas Miser ® Demand Regulator: The Intelligent RegulatorThe Gas Miser Regulator is the most advanced,yet simple-to-use calibration gas delivery systemavailable. Made of nickel-plated brass and polishedaluminum (especially im por tant for reactive gases),the Gas Miser Regulator can supply gas flow from0.1 lpm to 3.0 lpm. But that’s only the be gin ning.Designed for use with any MSA Model RP CalibrationCylinder except chlorine and ammonia*, the GasMiser Regulator features an au to mat ic ON/OFFvalve that releases gas only on demand. So only theamount of gas needed to calibrate your MSAinstrument is delivered accurately. When thecalibration is complete, the Gas Miser Regulatorshuts off automatically. And, for user convenience,the regulator can stay con nect ed to the cylinderwhere it remains in a ready state - making it idealfor such fixed installations as work benches andcalibration stations.Gas Miser ®Model RPGas Miser ® ModelBD-20The Gas Miser Regulator also eliminates the need to changeregulators to accommodate different instruments or flow rates.It’s not only intelligent, it’s cost-efficient. Supplied with calibrationtubing and special fitting.* A Gas Miser Regulator for chlorine and ammonia is available forModel RP cylinders —P/N 10034391Regulators.25/1.5 LPM Flow ControlModel RP Cylinder .25 lpm* 467895Model RP Cylinder 1.5 lpm 467896Gas Miser Demand Regulator:Model RP 710288Model RP, Chlorine and Ammonia 10034391Model BD-20, with CGA 590 fitting 710289Model RP Combination RegulatorModel RP Combination Regulator, .25 lpm 711175Gas Miser ManifoldInstrumentation4-station Manifold 710274Model RP Calibration Check KitsCheck Kit, Model RP, with 1.5 lpm regulator- completeCheck Kit, Model RP, with 0.25 lpm regulator- complete* Can be used with chlorine and ammonia; replaces P/N 809945.477150477149Model RP Combination RegulatorsTwo regulators in one. Trigger activationallows a bump test or calibration check inthe “SQUEEZE” mode or fixed-flow cal i bra tionin the up or “LOCKED” position. Designedfor use with all Model RP and Econo-Calcalibration cylinders. Supplied withcalibration tubing and special fitting..25/1.5 LPM Flow Control Model RPGas Miser ® ManifoldThe Gas Miser Manifold is not only acylinder holder but it also incorporates a4-station “bump test” or calibration manifold.It works with Model RP and Econo-Calcylinders and Gas Miser reg u la tor on anypumped or aspirated instrument.The manifold will supply the correct amount of gas required andwill bump test or calibrate up to four in stru ments simultaneously.Gas Miser regulator sold separately.Model RP Calibration Check KitsModel RP Check Kits consist of a regulatingvalve which includes a gauge to measure containerpressure, an adapter hose, sensor adapter (whereapplicable), instructions, and a case fitted with roomfor two Model RP cylinders of calibration check gas.Customer Service: 1300 728 672 • Website: www.msa.net.au • New Zealand Customer Service 0800 441 335 200