HP LaserJet 4345mfp Series Service Manual - ENWW

Upgrading the HP Jetdirect firmwareThe HP Jetdirect network interface in the MFP has firmware that can be upgraded separately fromthe MFP firmware. This procedure requires that you install HP Web Jetadmin Version 7.0 or later onthe computer. See Using HP Web Jetadmin software. Complete the following steps to update theHP Jetdirect firmware by using HP Web Jetadmin.1 Open the HP Web Jetadmin program.2 Open the Device Management folder in the drop-down list in the Navigation panel. Navigate tothe Device Lists folder.3 Select the device that you want to update.4 In the Device Tools drop-down list, select Jetdirect Firmware Update.5 Under Jetdirect firmware version the HP Jetdirect model number and current firmware versionare listed. Make a note of these.6 Go to www.hp.com/go/wja_firmware.7 Scroll down to the list of HP Jetdirect model numbers and find the model number you wrote down.8 Look at the current firmware version for the model, and see if it is later than the version youwrote down. If it is, right-click on the firmware link, and follow the instructions on the Web page todownload the new firmware file. The file must be saved into the :\PROGRAM FILES\HPWEB JETADMIN\DOC\PLUGINS\HPWJA\FIRMWARE\JETDIRECT folder on the computer thatis running the HP Web Jetadmin software.9 In HP Web Jetadmin, return to the main device list and select the digital sender again.10 In the Device Tools drop-down list, select Jetdirect Firmware Update again.11 On the HP Jetdirect firmware page, the new firmware version is listed under Jetdirect FirmwareAvailable on HP Web Jetadmin. Click the Update Firmware Now button to update theJetdirect firmware.76 4 Maintenance