HP LaserJet 4345mfp Series Service Manual - ENWW

Moving the MFPBefore moving the MFP, be sure to lock the scanner. The scanner lock is underneath the scanner lid,to the left of the scanner glass.NOTE After moving the MFP, unlock the scanner. The MFP cannot initialize correctly whenthe scanner is locked.The MFP is heavy and should be lifted by three people. One person should stand at the front of theMFP and should grip the sides, and the other two people should stand at the sides of the MFP andshould grip the sides and back. Remove the output bin or other optional output accessories beforemoving the MFP. To lift the MFP, grip the lift handles that are on the sides and on the back of theMFP. Do not attempt to lift the MFP by gripping any other part of the MFP. If the bottom of the MFPis attached to an optional accessory (such as a 500-sheet feeder or a storage cabinet), theaccessory latches must be unlocked before moving the MFP.WARNING! To prevent possible injury to yourself or damage to the MFP, separate the MFPfrom any currently installed optional accessories (for example an optional feeder or a stapler/stacker) before lifting the MFP.CAUTION When placing the MFP onto the 500-sheet feeder, be sure to place it directly overthe alignment pins.Locking and unlocking optional accessoriesFor more stability to prevent the MFP from tipping over, the optional 500-sheet feeders and thecabinet are automatically locked to the bottom of the MFP. When accessories are installed, verifythat the lock on each accessory is in the rear (locked) position.To unlock the accessories, slide the lever to the forward (unlocked) position.14 1 Product information