Lyra Operation Manual - Test and Measurement - Prism Sound

More documents

Recommendations

Info

Prism Sound LyraOperation ManualRevision 1.00SynchronizationSystem sample rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz or 192kHzSynchronization sources: Master: LocalSlave: Wordclock, DI (S/PDIF input) or ADAT [*Note1]Local clock accuracy: +/-50ppmJitter rejection:60dB/decade above 100HzInternal mixer delay: 44.1k: 0.57ms; 48k: 0.52ms; 88k2: 0.20ms; 96k: 0.18ms; 176.4k:(total analog in to out) 0.09ms; 192k: 0.08msPhysicalDimensions:Weight:Mains voltage:Power consumption:Fuse rating:Operating ambient:Table-top (including feet): 285x242x50mm1U rack-mount (including optional ears): 483x242x44.5mm2.1kg.90VAC-250VAC, 50-60Hz15W0.5A(T), 20mm, glass0 to 35ºC, 85% maximum relative humidityPerformance Plots© 2013 Prism Media Products Ltd1.57
Page 3:
LyraOperation Manualby Ian DennisTh
Page 7 and 8:
Part1General information
Page 9: Prism Sound LyraOperation ManualRev
Page 12 and 13: Prism Sound Lyra2 Introduction to L
Page 14 and 15: Prism Sound Lyra2.3 About this manu
Page 16 and 17: Prism Sound Lyra3 Quick start guide
Page 18 and 19: Prism Sound LyraOperation ManualRev
Page 20 and 21: Prism Sound Lyra· The installation
Page 27 and 28: Part5Lyra hardware
Page 29 and 30: Prism Sound Lyra5.1.1.1 OverkillerO
Page 33 and 34: Prism Sound Lyramute button and hig
Page 35 and 36: Prism Sound Lyra5.3 Front panelOper
Page 39 and 40: Part6Lyra software
Page 41 and 42: Prism Sound LyraLyra Control Panel
Page 43 and 44: Prism Sound Lyra6.1.2 Inputs tabOpe
Page 47 and 48: Part7Technical topics
Page 51 and 52: Prism Sound LyraListening experienc
Page 58: Prism Sound LyraOperation ManualRev
Page 67 and 68: - I -Identify button 35Impact filte
show all

Lyra Operation Manual - Test and Measurement - Prism Sound

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?