Cisco AP541N Dual-band Single-radio Access Point Administration ...
Cisco AP541N Dual-band Single-radio Access Point Administration ...
Cisco AP541N Dual-band Single-radio Access Point Administration ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
1Getting StartedConnecting the <strong>Access</strong> <strong>Point</strong> to a PCLaunching the <strong>Access</strong> <strong>Point</strong> Configuration UtilityThis section contains information for the for launching the <strong>Access</strong> <strong>Point</strong>Configuration Utility:• Using the default static IP address of the switch. Follow the instructions in the“Display the Configuration Utility By Using the Default IP Address”section.• Using <strong>Cisco</strong> Configuration Assistant (CCA). Follow the instructions in the“Display the Configuration Utility by Using <strong>Cisco</strong> Configuration Assistant2.1 or higher” section.• Using the an IP address assigned to the switch through DHCP. Follow theinstructions in the “Display the Configuration Utility by Using Another IPAddress” section.Display the Configuration Utility By Using the Default IPAddressTo access the <strong>Access</strong> <strong>Point</strong> Configuration Utility, enter the default static IPaddress of the access point into a Web browser, do the following:STEP 1Enter the <strong>Cisco</strong> AP 541N default static IP address in the address bar and press Enter. Forexample, http://192.168.10.10.The Login window displays, as shown in Figure 3.11 <strong>Cisco</strong> AP 541N <strong>Dual</strong>-<strong>band</strong> <strong>Single</strong>-<strong>radio</strong> <strong>Access</strong> <strong>Point</strong> Quick Start Guide
Change language