Cisco AP541N Dual-band Single-radio Access Point Administration ...

2StatusTraffic StatisticsWired SettingsThe Wired Settings include the MAC address, management VLAN ID, IP address,subnet mask, and DNS information. To change any of these settings, click Edit tobe redirected to the Setup > LAN Settings page.For information about configuring these settings, see LAN Settings, page 40.Wireless SettingsThe Wireless Settings section indicates the status of the wireless radio, andincludes the Radio Mode and Channel. The Wireless Settings section also showsthe MAC address (read-only) associated with each wireless radio interface.To change the Radio Mode or Channel settings, click Edit. You are redirected to theWireless > Radio Settings page.For information about configuring these settings, see Modifying Wireless RadioSettings, page 52 and Modifying Advanced Settings, page 79.Traffic StatisticsThe Traffic Statistics page provides basic information about the access point, areal-time display of the transmit and receive statistics for the Ethernet interface,and VAP (Virtual Access Point) statistics. The transmit and receive statistics aretotals since the access point was last started. If you reboot the access point, thesefigures indicate transmit and receive totals since the reboot.To view transmit and receive statistics for the access point, click the TrafficStatistics tab. Click Refresh to refresh the page.29 Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide