Cisco AP541N Dual-band Single-radio Access Point Administration ...

2StatusRogue AP DetectionSave or Import a List of Known Access PointsTo save the Known AP List to a file, click Save. The list contains the MACaddresses of all access points that have been added to the Known AP List. Bydefault, the filename is Rogue2.cfg. You can use a text editor or Web browser toopen the file and view its contents.Use the Import feature to import a list of known access points from a saved list.The list might be from another Cisco access point or created from a text file. If theMAC address of an access point appears in the Known AP List, it will not beshown as a rogue.The file you import must be a plain-text file with a .txt or .cfg extension. Entries inthe file are MAC addresses in hexadecimal format with each octet separated bycolons, for example 00:11:22:33:44:55. Separate the entries with a single space.For the access point to accept the file, it must contain only MAC addresses.To import an access point list from a file, do the following:STEP 1Choose whether to replace the existing Known AP List or add the entries in theimported file to the Known AP List.• Select the Replace radio button to import the list and replace the entirecontents of the Known AP List.• Select the Merge radio button to import the list and add the access pointsin the imported file to the access points currently displayed in the KnownAP List.STEP 2STEP 3Click Browse and choose the file to import.Click Import.Once the import is complete, the screen refreshes and the MAC addresses ofthe access points listed in the imported file appear in the Known AP List.39 Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide